Catalogue
Catalog Identification Systems
www.pepperl-fuchs.com
Page
/ 205
Make a request
/ 205
See other catalogues for
PEPPERL & FUCHS
Text version of the page
Text version of the page
Identification Systems - Introduction
Optical identification systems
The standard optical identification systems are pure fixed code systems. The code is located on a label, e.g. as barcode or as two-dimensional Matrix code. These labels are optically scanned or photographed using the reflection principle and the code is read on the basis of successive differences of intensity. The
barcode reading
devices (scanners) are usually connected with each other using a CAN bus and are transmitted collectively to the higher-level
Fieldbus
. The Matrix codes are read by a
industrial camera
using an image recognition method and are usually directly connected to a Fieldbus.
0128016691675
1.4 Selection criteria for identification systems
In the following table, all systems with their features are compared. The application-specific notes below offer further decision support.
Inductive
Microwave
Optical
System IV
System IP
System MV
System MT
Barcode
Data Matrix
Frequency
200-300 kHz
125 kHz
2.45 GHz
2.45 GHz
visible spectrum
Max. passing speed
- read fixed code
- read data
- write data*
10 m/s 2 m/s
0.2 m/s
2.5 m/s
0.5 m/s 0.4 m/s
< 30 m/s
< 30 m/s
< 30 m/s
25 m/s 25 m/s 1 m/s
20 m/s 20 m/s
6 m/s 6 m/s
Memory volume
1 Kbit (passive) 64 Kbits (active)
928 bits R/W
plus 64 bits
R/O
256 Kbits and 64 Kbits
574 bits
128 bits
8 Kbits
Possible read distances
< 100 mm
< 140 mm
< 2000 mm
< 4000 mm
<2500 mm
< 300 mm
Possible write distances
< 68 mm
< 80 mm
< 2000 mm
< 500 mm
-
-
Mounting of the code/data carriers
- in metal
- on metal
Yes Yes
Yes Yes
No Yes
No Yes
No
Yes
No Yes
Protection class of the code/data carriers
IP68/IP69k
IP68/IP69k
IP67
IP67
Bus interfaces
Serial Profibus Interbus 16 bits I/O 4 bits relay Allen Bradley Remote I/O
Serial Profibus Interbus DeviceNet Ethernet Allen Bradley Remote I/O
Serial Profibus Ethernet
Serial
Serial Profibus
Serial
Special features
Particularly EMC stable
Cost-effective data carriers
High data transfer rate
Multitag-capable, relay output
Cost-effective labels, high scan rate
Small labels, high data volume
It is recommended to carry out write processes in standstill and perform a control reading of the data afterwards.
Subject to reasonable modifications due to technical advances.
Copyright Pepperl+Fuchs, Printed in Germany
11
Pepperl+Fuchs Group • Tel.: Germany +49 621 776-0 • USA +1 330 4253555 • Singapore +65 67799091 • Internet http://www.pepperl-fuchs.com
DirectIndustry's Virtual Technical Library: PDF Catalogue | Technical Documentation | Brochure | Manual | Industrial directory | Specifications | Characteristics
Search
Go
Contents table
p
.1
p
.2
p
.3
p
.4
p
.5
p
.6
p
.7
p
.8
p
.9
p
.10
p
.11
p
.12
p
.13
p
.14
p
.15
p
.16
p
.17
p
.18
p
.19
p
.20
p
.21
p
.22
p
.23
p
.24
p
.25
p
.26
p
.27
p
.28
p
.29
p
.30
p
.31
p
.32
p
.33
p
.34
p
.35
p
.36
p
.37
p
.38
p
.39
p
.40
p
.41
p
.42
p
.43
p
.44
p
.45
p
.46
p
.47
p
.48
p
.49
p
.50
Pages:
1-50
51-100
101-150
151-200
201-205
pdf-page pdf di En 2008-10-41-11