IDENT Control

Technical data

General specifications

Number of read/Write heads max. 4alternative 2 read/write heads and 2 trigger sensors

Indicators/operating means

LEDs 1, 2, 3, 4 Status indicator for read/write headsgreen: command at read/write head activeyellow: approx. 1 second long, if command was suc- cessfully executedLED PWR/ERR green: power onred: Hardware fault LED UL green: Interface Power ON/OKLED TxD Green: Flashes in rhythm with the transmitted data LED RxD green: flashes in rhythm of receiving dataLC display two-line multi-function display with 12characters per line configuration of the control interface and display of connected read/write heads as additional pictograms; easy and direct selection of operating commands Button 4 keys: ESC, up, down and return

Electrical specifications

Rated operational voltage U
e 20 ... 30 V DC , PELVRipple 10 % at 30VDC Current consumption 2 A incl. read/write headsPower consumption P
2,5 W Without read/write heads Electrical isolation basic insulation acc. to DIN EN 50178, rated insulation voltage of 50 V
eff

Interface

Physical RS 232Protocol ASCII Transfer rate 1200; 2400; 4800; 9600; 19200; 38400 Bit/s

Standard conformity

Electromagnetic compatibility EN 61326

Ambient conditions

Ambient temperature -25 ... 70 °C (248 ... 343 K)Storage temperature -30 ... 80 °C (243 ... 353 K) Climatic conditions air humidity max. 96 % Salt spray resistant to EN60068-2-52Shock and impact resistance Oscillation (Sine): 5 g, 10 - 1000 Hz to EN 60068-2-6Shock (Half-sine): 30 g, 11 ms in accordance with EN 60068-2-27

Mechanical specifications

Protection degree IP67 according to EN 60529 Connection read/write heads: M12 plug connection, 4-pin, scree- ned, power supply: M12 plug connection protection earth: M6 earthing screw RS 232: M12 plug connectionMaterial Housing aluminium, powder coatedInstallation snap-on to 35 mm standard rail or screw fixing Mass approx. 1000 g
Date of issue 2005-08-18 - Catalogue Identification Systems 2005/2006 Subject to reasonable modifications due to technical advances.Copyright Pepperl+Fuchs, Printed in Germany

Pepperl+Fuchs Group • Tel.: Germany +49 621 776-0 • USA +1 330 4253555 • Singapore +65 67799091 • Internet http://www.pepperl-fuchs.com

31