Text version of the page 
IDENT Control
Technical data
General specifications
Number of read/Write heads max. 4alternative 2 read/write heads and 2 trigger sensors
Indicators/operating means
LEDs 1, 2, 3, 4 Status indicator for read/write headsgreen: command at read/write head activeyellow: approx. 1 second long, if command was suc-
cessfully executedLED PWR/ERR green: power onred: Hardware fault LED State green: interface OK
Off: Not ready for operationLED Link/Act green: connection to hostgreen flashing: bus active LED Traffic green: flashes in rhythm of sending/receiving dataLED 100 MBit yellow: transfer rate 100 MBit/soff: transfer rate 10 MBit/s LC display two-line multi-function display with 12characters per line configuration of the control interface and display of connected read/write heads as additional pictograms; easy and direct selection of operating commands and addressingButton 4 keys: ESC, up, down and return
Electrical specifications
Rated operational voltage U
e 20 ... 30 V DC , PELV Ripple 10 % at 30VDCCurrent consumption 2 A incl. read/write heads Power consumption P
3,5 W Without read/write headsElectrical isolation basic insulation acc. to DIN EN 50178, rated insulation voltage of 50 V
eff Interface
Physical Ethernet Protocol TCP/IP Port 80: HTTPPort 502: ModbusPort 10000: Ident protocolTransfer rate 10 MBit/s or 100 MBit/s
Standard conformity
Electromagnetic compatibility EN 61326
Ambient conditions
Ambient temperature -25 ... 70 °C (248 ... 343 K) Storage temperature -30 ... 80 °C (243 ... 353 K)Climatic conditions air humidity max. 96 % Salt spray resistant to EN60068-2-52 Shock and impact resistance Oscillation (Sine): 5 g, 10 - 1000 Hz to EN 60068-2-6Shock (Half-sine): 30 g, 11 ms in accordance with EN 60068-2-27
Mechanical specifications
Protection degree IP67 according to EN 60529Connection read/write heads: M12 plug connection, 4-pin, scree-ned, power supply: M12 plug connection protection earth: M6 earthing screw Ethernet: RJ45 Material Housing aluminium, powder coated Installation snap-on to 35 mm standard rail or screw fixingMass approx. 1000 g
Date of issue 2005-08-18 - Catalogue Identification Systems 2005/2006 Subject to reasonable modifications due to technical advances.Copyright Pepperl+Fuchs, Printed in Germany Pepperl+Fuchs Group • Tel.: Germany +49 621 776-0 • USA +1 330 4253555 • Singapore +65 67799091 • Internet http://www.pepperl-fuchs.com
25