Identification Systems - IDENT Control
Switch cabinet AND field solution
Two fastening solutions make both installation in the switch cabinet and mounting in the field possible. The IDENT Control has a snap-in hook at the rear for fixing the top hat DIN rail. Due to the L-shaped housing, the de-vice including
bus connector fits into a 120 mm grid in the switch cabinet. The mounting depth is only 70 mm. Thus, an installation in flat switch boxes with a depth of only 100 mm is also possible. Moreover, 3 mounting holes offer the mounting option via M6 screw connections in the field.
Read/write heads
The following read/write heads are available for the IDENT Control :•M18 series (Ø 18 mm)•M30 series (Ø 30 mm)
•Flat housing F61 (76 mm x 28 mm x 12 mm)•VariKont L design (40 mm x 40 mm x 55 mm)•Compact housing FP (80 mm x 80 mm x 60 mm)
•Flat housing F15 (140 mm x 140 mm) (125 kHz and 2.45 GHz)With its 4 LEDs, the VariKont L design offers an ideal visibility of the oper-ating voltage display and the display for "Read head active" / "Data suc-cessfully read or written".
The IDENT Control offers integrated interfaces to the current Fieldbus sys-tems such as Profibus, EtherNet TCP/IP, Modbus and serial connections (RS232/RS485/RS422). A DeviceNet and EthernetIP connection will be available at the end of 2005. Due to the common control unit, the command structure and the operating philosophy are very similar.
Web server functionality
Often, already existing networks can be used via an EtherNet connection. High transfer rates and new functions are provided. This makes intermedi-ate bus systems superfluous. If desired, the web server functionality even informs you directly via SMS on a mobile phone, e.g. whether a fault has occurred in the plant, which spare part is required, which reaction must be initiated. This reduces downtimes and also allows a remote parameterisa-
tion, which is protected by an access code, or an on-site release.
Issue date 2005-08-18 - Catalogue Identification Systems 2005/2006 Subject to reasonable modifications due to technical advances.Copyright Pepperl+Fuchs, Printed in German y Pepperl+Fuchs Group • Tel.: Germany +49 621 776-0 • USA +1 330 4253555 • Singapore +65 67799091 • Internet http://www.pepperl-fuchs.co m 19