VBG-IP-K5-DMAS-Interface industrial gateway Technical data Function
General specifications
The VBG-IP-K5-DM is an Ethernet gatewayfor 2parallel AS-i lines, which means thatthe data of 2AS-i lines can be transmitted
via an IP address. Each Industrial ethernet gateway issupplied with a unique MAC-ID. An IPaddress can be assigned to the gateway bymeans of this MAC-ID and Bootp.The design of the master is ideal for use in acabinet.Two push buttons are used for addressassignment of the AS-Interface slaves andacceptance of the desired configuration. Inconfiguration mode, all detected AS-Interface slaves are displayed on the 2-digitLCD. In normal operation, the LCD is blankunless the master detects a faulty AS-Interface slave. There are 7LEDs on the
front panel for rapid diagnostics.
AS-Interface specification V2.11
Indicators/operating means
LED AS-i 2 assignment of display to AS-Interface strand 2;LED greenLC display, two-digit address display, error message
Masters and GatewaysPower Supplies, Extender, RepeatersSafety at workI/O ModulesControl cabinetI/O ModulesField applicationAnalogue modulesOther modulesInductive sensorsPhotoelectric sensorsRotary encodersAccessories LED ETHERNET ethernet active; LED greenLED CONFIG ERR configuration error; LED red LED PRG ENABLE autom. programming; LED greenLED ENERGY voltage ON; LED green LED PRJ MODE projecting mode active; LED yellowLED U AS-i AS-Interface voltage; LED green Switch SET Selection and setting of a slave addressButton MODE Mode selection/save configuration
Electrical specifications
Insulation voltage U
i 500 V Rated operational voltage U
e from AS-Interface or separatelyRated operational current I
e 200 mA from AS-Interface
Interface
Protocol Ethernet via TCP/IP Interface type 10 Base-TTransfer rate 10 MBit/s
Accessories
Connection
VAZ-SW-ACT32
PROFIBUS RS 485 interface
Full version of the AS-i Control Tools
Ethernet RJ-45AS-Interface screw terminals
Ambient conditions
Ambient temperature 0 ... 55 °C (273 ... 328 K) Storage temperature -25 ... 85 °C (248 ... 358 K)
Mechanical specifications
Protection degree Housing: IP40 according to DIN 40050terminals: IP20 according to DIN 40050Mass 420 g Construction type terminal rail housing, LDG-A-30
The AS-i Control Tools software is supplied as restricted version together with the documen-tation and performs the addressing, programming and monitoring of the AS-Interface net-work. The full version of AS-i Control Tools is available as an accessory and features anexpanded diagnostics professional monitor as well as a larger program memory for AS-Interface Controlwhich makes it possible to detect faulty telegrams of slaves.
Issue date 2004-11-19 - Catalogue AS-Interface 2004/2005 Subject to reasonable modifications due to technical advances.Copyright Pepperl+Fuchs, Printed in German y Pepperl+Fuchs Group • Tel.: Germany +49 621 776-0 • USA +1 330 4253555 • Singapore +65 67799091 • Internet http://www.pepperl-fuchs.co m
45