Catalogues - catalog-as-interface

Catalogue Catalog AS-interface

www.pepperl-fuchs.com

Page

/ 356

Contact the
Manufacturer

Where to buy
this product ?

Request
a Quote

PEPPERL & FUCHS - 89304, 95149, 95350, 94226, 94952, 93707, 91883

/ 356

See other catalogues for PEPPERL & FUCHS

Text version of the page

AS-Interface sensor-/actuator module

VAA-1E3A-M18-ZE/E2-V1


	Technical data
	General specifications
	Slave type	Standard slave
	Indicators/operating means
	LED FAULT	communication error / address is 0; LED red
	LED PWR	AS-Interface voltage; LED green
	Electrical specifications
	Auxiliary voltage (output) U_AUX	24 V DC ± 15 % PELV (protection class 3 according to VDE 0106/IEC 364-4-41)
	Rated operational voltage U_e	26.5 ... 31.6 V from AS-Interface
	Rated operational current I_e	< 20 mA
	Input
	Number/Type	1 Input for 2-wire sensor
	Supply	from external auxiliary voltage U_AUX
	Switching point	OFF < 0.8 mA ON > 5 mA
	Output
	Number/Type	3 electronic outputs, PNP
	Supply	from external auxiliary voltage U_AUX
	Current	20 mA per output
	Programming instructions
	Profile	S-9.F
	IO code	9
	ID code	^F
	ID2 code	0
	Data bits (function via AS-Interface)	input output
	DO	IN4 O4
	D1	- OUT2
	D2	-OUT3
	D3	IN1 -
	Parameter bits (programmable via AS-i)	function
	PO	not used
	P1	not used
	P2	not used
	P3	not used
	Ambient conditions
	Ambient temperature	0 ... 70 °C (273 ... 343 K)
	Storage temperature	-40 ... 70 °C (233 ... 343 K)
	Mechanical specifications
	Protection degree	IP67 according to EN 60529 The protection class appplies only for installation of the module in a connection housing for parts of the module located outside of the connection housing (external M12 connection, inside cable connection). The housing professional duct must be sealed with a suitable professional adhesive.
	Connection	AS-Interface and auxiliary voltage: M12x1 round connector manufacturers auxiliary voltage, input and outputs: 20 cm connection cable
	Mass	110 g

Function

The cylindrical AS-Interface module permits an easy connection of standard manufacturer of actuators to the AS-Interface. The input/output combination of 1:3 makes it particularly suitable for operation with motors (start/stop, forward/reverse, rotational speed 1/2, alarm indication); this means that all other actuators can also be easily connected to the AS-Interface. By means of mechanical adaptor nuts, the AS-Interface slave attaches to PG manufacturer of cable glands as well as metric cable glands. MOVIMOT® from SEW-Eurodrive requires an M25 adaptor with M18 x 1 quick disconnects which is included in the delivery package. The mechanically strong and short design is an advantage of the stainless steel head ferrule in well-tried and tested Pepperl+Fuchs quality.

The M12 plug establishes a connection to AS-Interface and to the auxiliary supply. Two LEDs show the voltage supply and AS-Interface communication errors. Using additional auxiliary power does not overload the AS-Interface power supply manufacturers. Therefore, up to 31 professional cylinder modules can be connected to the AS-Interface line.

Accessories VAZ-2T5-G2

Splitter box AS-Interface and auxiliary voltage to 5 x M12 round connector

VAZ-2T1-FK-1M-PUR-V1-W

Splitter box AS-Interface and auxiliary voltage to 1 x M12 round connector

■a

TO >'

0) <D

W TO

«.Ì %JE -5 <°

S 2

— o

».2

s (0

2 Li-

o E a>

3 O)

(/) _0>

3 ■o o E

a> .c

o (/>

a> (/) a> .>

■o _c

_ o

a> o

"ä> v>

o ^c

~ a>

O (/)

Q-

W <D

o o

a: o cc

o (/>

(/)

a> o o <

o o cm

CO tz

£ <

CD O

Subject to reasonable modifications due to technical advances.

• Internet http://www.pepperl-fuchs.com 235

Pepperl+Fuchs Group • Tel.: Germany +49 621 776-0 • USA +1 330 4253555 • Singapore +65 67799091