VAA-4A-G2-E2AS-Interface actuator module Technical data Function

General specifications

The VAA-4A-G2-E2 is an AS-Interface cou-pling module with four electronic outputs,which can be loaded to 24VDC and 1.5A. The IP67 flat module features an integratedaddressing professional jack and is ideal for applicationsin the field. Connection to the industrial actuators is provided viaM12x1 screw connections. The currentswitching state of each channel is indicatedby an LED, located on the module's top side.Similarly, an LED is provided to professional monitor theAS-Interface communication and to indicate that the module has the address0. If an AS-Interface communication error occurs, theoutputs are de-energised.The voltages of the AS-Interface and of theexternal switched mode power supply are also indicated byan LED each. The U-G3FF mounting base is normally usedfor the connection of the AS-Interface flatcable and the external 24V DC power sup- ply. The specially designed base enablesusers to connect flat cables from both sides.This means, for example, that 90° curves can be laid with very tight radii (variable flat cableguide).

Slave type Standard slave

Indicators/operating means

LED FAULT communication error / address is 0; LED redLED PWR AS-Interface voltage; LED green
Masters and GatewaysPower Supplies, Extender, RepeatersSafety at workI/O ModulesControl professional cabinet LED AUX ext. auxiliary voltage U
AUX ; LED greenLED OUT switching state (output); 4 LED yellow

Electrical specifications

Auxiliary voltage (output) U
AUX 24 V DC ± 15 % PELV Protection class IIIRated operational voltage U
e 26.5 ... 31.6 V from AS-Interface Rated operational current I
e 30 mA

Output

Number/Type 4 electronic outputs, PNPSupply from external auxiliary voltage U
AUX Current 1.5 A pro output, 4 A totalVoltage (U
AUX - 0,5 V)

Programming instructions

Profile S-8.F IO code 8ID code F

Note: The mounting base for the module is soldseparately.

Data bits (function via AS-Interface) inputoutput D0 IN4O4 D1 -OUT2D2 -OUT3 D3 -OUT4 Parameter bits (programmable via AS-i) function P0 communication monitoringP0 = 1 (basic setting), monitoring = ON, i.e. if communication fails, the outputs are de-energised P0 = 0, monitoring = OFF, if communication fails, the outputs maintain their conditionP1 not used
I/O ModulesField applicationAnalogue modulesOther modulesInductive sensorsPhotoelectric sensorsRotary encodersAccessories

Accessories

P2 not usedP3 not used

VBP-HH1

Ambient conditions

Hand-held programming device

Ambient temperature -25 ... 60 °C (248 ... 333 K)

VAZ-PK-1,5M-V1-G

Storage temperature -25 ... 85 °C (248 ... 358 K)

Connection cable module/hand-held pro- gramming device

Mechanical specifications

VAZ-FK-ED-G2

Protection degree IP67 according to EN 60529Connection cable piercing methodflat cable yellow/flat cable blackinputs/outputs: M12 round connector specification

AS-Interface end industrial seal for G2 modules

Mass 100 gMounting Mounting base

Matching system components

U-G3FF Mounting plate for connection to flat ca-ble (AS-Interface and external auxiliary power)

Issue date 2004-11-19 - Catalogue AS-Interface 2004/2005 Subject to reasonable modifications due to technical advances.Copyright Pepperl+Fuchs, Printed in Germany

Pepperl+Fuchs Group • Tel.: Germany +49 621 776-0 • USA +1 330 4253555 • Singapore +65 67799091 • Internet http://www.pepperl-fuchs.com

169