Catalogue Catalog AS-interface
www.pepperl-fuchs.com
print switch display
Page / 356
Contact the
Manufacturer
Where to buy
this product ?
Request
a Quote
PEPPERL & FUCHS - 14814, 17217, 94046
/ 356
See other catalogues for PEPPERL & FUCHS
Text version of the page

VAA-4EA-KF2-ZE/TAS-Interface sensor-/actuator module Technical data Function

General specifications

The VAA-4EA-KF2-ZE/T AS-Interface cou-pling module is a industrial cabinet module with4inputs and 4electronic outputs for 115/230VAC. To install the VAA-4EA-KF2-ZE/T, simply snap it onto the 35mm DINRail, according to EN50022, with the inte-grated Power Rail.When an AS-Interface master/gateway isused in the cabinet housing, the AS-Interfacesignal is automatically transmitted via thePower Rail. The connection of the module tothe AS-Interface cable is accomplished by simply snapping it onto the DIN Rail.The plug-in coded terminals of the inputs andoutputs allow "online" maintenance, i.e.while the system is under power. The termi-nals are coded to prevent incorrect connec-tions at the inputs and outputs.If a master/gateway other than the one in thecabinet housing is used, the connection tothe AS-Interface cable is established via the same terminals. Once the AS-Interface cablehas been connected to the terminals, the AS-Interface signal is automatically transferred to the Power Rail.Power to the module and to the inputs is sup-plied by the AS-Interface cable and the out-puts are powered externally (see connectiondiagram). A programming professional jack is available foraddress configuration.

Slave type Standard slave
Indicators/operating means
LED PWR/FAULT dual LED green/redgreen: AS-Interface voltagered: communication error or address 0green/red flashing: overload sensor supplyLED IN switching state (input); 4 LED yellow
Masters and GatewaysPower Supplies, Extender, RepeatersSafety at work LED OUT switching state (output); 4 LED yellow
Electrical specifications
Auxiliary voltage (output) U
AUX 115 / 230 V AC ± 10 %Rated operational voltage U
e 26.5 ... 31.6 V from AS-Interface Rated operational current I
e 80 mA (without sensors) / max. 230 mA
Input
Number/Type 4 inputs for 2- or 3-wire sensors (PNP), DCSupply from AS-Interface Voltage 21 ... 31 V DCCurrent loading capacity 150 mA, short-circuit protected Switching point 0 (unattenuated) 2 mA 1 (attenuated) 4 mA
Output
Number/Type 4 electronic outputs, ACSupply from external auxiliary voltage U
AUX

Note:

Current 2 A total (T
B 50°C) 1.5 A total (T 60°C)

The outputs are de-energised by means ofan integrated watchdog, whenever communi-cation on the AS-Interface cable is inter-rupted for more than 80ms. The watchdogcan be disabled by the parameter bit P0.If a short circuit occurs in the sensor supply,the AS-Interface master indicates an errorand the module disconnects from the AS-Interface.

I/O ModulesControl cabinetI/O ModulesField applicationAnalogue modulesOther modulesInductive sensorsPhotoelectric sensorsRotary encodersAccessories B 0.7 A total (T
B 70°C)Voltage (U
AUX - 2 V) Electrical isolation AS-Interface/Outputs: Industrial safe isolation according to EN50178 (250VAC)
Programming instructions
Profile S-7.FIO code 7 ID code F Data bits (function via AS-Interface) inputoutput D0 IN1OUT1D1 IN2OUT2 D2 IN3OUT3D3 IN4OUT4 Parameter bits (programmable via AS-i) functionP0 communication monitoringP0 = 1 (basic setting), monitoring = ON, i.e. if communication fails, the outputs are de-energised P0 = 0, monitoring = OFF, if communication fails, the outputs maintain their condition

Accessories

P1 not usedP2 not used

VBP-HH1

P3 not used

Hand-held programming device

Ambient conditions

VAZ-PK-1,5M-V1-G

Ambient temperature -25 ... 70 °C (248 ... 343 K)Storage temperature -25 ... 85 °C (248 ... 358 K)

Connection cable module/hand-held pro-gramming device

Mechanical specifications
Protection degree IP20 according to EN 60529

UPR-05

Connection removable coded terminals, Power RailMass 170 g

Universal Power Rail with DIN rail and cover, 5 leads

Mounting DIN rail

UPR-E End cap for UPR-03 und UPR-05

Issue date 2004-11-19 - Catalogue AS-Interface 2004/2005 Subject to reasonable modifications due to technical advances.Copyright Pepperl+Fuchs, Printed in German y

Pepperl+Fuchs Group • Tel.: Germany +49 621 776-0 • USA +1 330 4253555 • Singapore +65 67799091 • Internet http://www.pepperl-fuchs.co m

125

DirectIndustry's Virtual Technical Library: PDF Catalogue | Technical Documentation | Brochure | Manual | Industrial directory | Specifications | Characteristics
Search Go
Contents table
page 101 p.101
page 102 p.102
page 103 p.103
page 104 p.104
page 105 p.105
page 106 p.106
page 107 p.107
page 108 p.108
page 109 p.109
page 110 p.110
page 111 p.111
page 112 p.112
page 113 p.113
page 114 p.114
page 115 p.115
page 116 p.116
page 117 p.117
page 118 p.118
page 119 p.119
page 120 p.120
page 121 p.121
page 122 p.122
page 123 p.123
page 124 p.124
page 125 p.125
page 126 p.126
page 127 p.127
page 128 p.128
page 129 p.129
page 130 p.130
page 131 p.131
page 132 p.132
page 133 p.133
page 134 p.134
page 135 p.135
page 136 p.136
page 137 p.137
page 138 p.138
page 139 p.139
page 140 p.140
page 141 p.141
page 142 p.142
page 143 p.143
page 144 p.144
page 145 p.145
page 146 p.146
page 147 p.147
page 148 p.148
page 149 p.149
page 150 p.150
Pages:
1-50
51-100
101-150
151-200
201-250
251-300
301-350
351-356
pdf-page pdf di En 2008-12-49-05