| 360, continuous Use 2 x M4 socket head cap screws and M4 washer - maximum tightening torque 2Nm 100 120 3600 35 When shaft flat or shaft ident mark is in line with cable exit, output is at mid travel (± 10°) The sensor housing allows for 20° adjustment via the mounting flange slots. IP68 or IP50 Exceeds 20 million operations (10 x 106cycles) of ± 75° 20 million operations (10 x106 cycles) of ± 75° Sensing element life is essentially infinite (contactless), and the SRH280 life figures refer to the operating shaft seal. Mechanical load (axial and radial) on the shaft should also be a considered. Contactless - no degradation due to shaft dither -40 to +120 @ 8Vdc input (tested to + 127 for 1 hour duration) -40 to +90 @ 30Vdc input (tested to + 122 for 1 hour duration) -55 to + 125 RTCA-DO160D, 10Hz to 2000Hz (random), 12.61g rms - all axes Survival to 2500g - all axes Threat 100V/m : derangement < ± 0.25% ES |