JC025
AND SINGLE AXIS ROCKER
JC030
Developed for applications where compact size and minimal above panel height is paramount, the JC025 and JC030 rockers arevery low profile whilst
industrial still providing precise fingertip control in one axis. The use of these rockers in a control panel allowsdesigners to develop very low profile assemblies whilst still maintaining the functionality of a much larger single axis
industrial joystick.These rockers have been designed for maintenance-free operation throughout an operating life of greater than five million
operations.
Typical applications include remote control chest packs, pendant controllers, low profile panel assemblies and control consoles.
PERFORMANCEMECHANICAL
5*15*Full deflection
50*Full deflection
±10
Self centering
>5 million
30
*14mm radius from center-25 to +70-40 to +80IP65 (when correctly panel sealed) IEC 60529IP60 (when correctly panel sealed) IEC 60529
Units supplied with O ring sealVirtually infinite1.8, 2, 2.9 or 5
±9
0-100, 10-90 or 25-75 of input (±2%)
48 - 52 of applied voltage
1.5 either side of center
22
Greater than 0.1**
0.25 (no load)
** The long life resistive elements require a high impedance load in the wiper circuit to minimise the current flowing through the wiper for optimum conditions2.5 either side of center35
5 resistive (or 200 with reduced switch life of 1 million operations) Breakout forceNOperating forceN
Maximum allowable forceN
Rocker operating angle°
Rocker action
Expected life (operations)
Weightg
ENVIRONMENTAL
Operating temperature°C
Storage temperature°C
Environmental protection
JC025
JC030 Ω
ELECTRICAL
Power dissipation @ 25°CW
Analogue Track
ResolutionTrack resistance (±20%)k Ω Track electrical angle°
Output voltage range%
Center tap voltage (no load)%
Center tap angle°
Supply voltage - maximumVdc
Wiper circuit impedanceM
Switch - Directional or Center Off
Switch operating angle°Supply voltage - maximumVdc
Load current - maximummA
ORDERING CODES
JC025 - …. - …. - BLK
Track resistanceRocker profile N =1.8k0-100% STD = standard E =5k 0-100% V00 = V profile R =2k10-90% Q =2.9k25-75%
6