Output impedance Ω 100 each axis49 - 51 of supply voltage Vs 1.1 24 X and Y axisWithin ±60 of Vs/2 @ 20C (±73 over full temperature range) XY with gate SWithin ±113 of Vs/2 @ 20C (±126 over full temperature range) Z axisWithin ±100 of Vs/2 @ 20C (±113 over full temperature range) XY axesThe dual outputs of the XY axes can be independently selected to be rising together in the same direction (PP) or opposed (PN). See order codeXYZThe three axis version can only provide a single output per axis Center reference output

(no load)

%Center reference impedancek Ω Current consumption - maxmAReturn to center voltage-

no load

mVOutput ramp

B0 handleX and XY only

DIMENSIONS

S handle X and XY onlyS1-S5 handleX and XY onlyK1 standard handleX and XY only E handleX, XY and XYZ versionsHL handleX, XY and XYZ versionsE1-E5 handleX, XY and XYZ versions

Top flange option

Gaiter protectorsupplied on K1 andBOonly(optional fit)
69 64 71 78 6.3
31 47.5FORWARD XXYY

Panel mounting detail

35 Forward Reverse ø3.5 in fourplaces
ø A

Top panel mounting A = 42Under panel mounting A = 31.5 Flange dimension 44.3mm square (with trim plate removed) 4 off through holes 3.3mm, countersunk on top surface. Use M3 x 90csk screws for mounting.

57 71 78 3547.5 Orientationident
Left Right

DIMENSIONS

Mid flange optionX and XY axes only

XXYY
44.3 Left Right Orientation ident
35 35 Four off bosses tosuit fixing screw Forward Reverse 44.3ø3.5 in fourplaces
ø31.5 35

B0 handleshown Panel mounting detail

Gaitortrappedbeneathpanel
75*9431.58.8 ø41 Boss * This dimension is 6mm greater than thehandle heights shown for the top flange option

Specification continued overleaf

23