Joystick Controllers - Finger Operated - PENNY GILES

Catalogue Joystick Controllers - Finger Operated

www.pennyandgiles.com

Page

/ 28

/ 28

See other catalogues for PENNY GILES

Text version of the page

JC 2 0 0 0

MULTI AXIS CONTACTLESS JOYSTICK

The JC2000 contactlessjoystick controller is designed for precision fingertip control applications where safety and long trouble-free life are primary requirements. It is available in one, two or three axis configurations and can accommodate a choice of handles, including push-button switch versions. Two mounting flange options allow attachment above or below the panel. The JC2000 s compact size, low operational force and high reliability are ideal for applications which include powered wheelchairs, robotics, CMM machines, medical and CCTV equipment, professional camera controls and remote controlled chest-packs.

PERFORMANCE ^^^^^^^^^^^L

M ECHANICAL

XY axes ^^^^^^^^^^^^H

Lever operating force

breakout N

operating N

maximum allowable N

Lever action (options) Lever gate profiles (options) Lever mechanical angle

single axis only °

round gate °

square and diamond gate °

cross and plus gate °

Expected life

Weight g

1 or 3*

2 or 4.5* (full deflection) 300* (XY version) 195N* (XYZ version) Self centering, aligned X and Y or non aligned Single axis, round, square, diamond, cross or plus

±20 in forward/reverse directions ±20

±20 to corners (± 14 to flats) ±20 at extent of travel

15 million operations (5 million with heavy duty spring) 90 without handle fitted *Measured 40mm above upper flange face

Z axis (handle style E and HL only)

Handle rotational torque breakout Nm

operating Nm

maximum allowable Nm

Handle mechanical angle °

Handle action

Expected life

0.04 0.06 1.0 ±20

Self centering

5 million operations

ENVIRON MEN TAL Operating temperature Storage temperature Environmental protection above flange EMC immunity level EMC emissions level ESD immunity level

_C -25 to +70

C -40 to +70

IP65 IEC 60529

60V/m, 25MHz to 1GHz, 1KHz 80% sine wave modulation, EN50082-2 (Sept 1995) Complies with EN50081-1 (1992), 30MHz to 1GHz

EN50082-2 (1995) ±8kV contact discharge; ± 15kV air discharge (10 discharges)

ELECTRI CAL Sensor type Resolution

Supply voltage range Vs Vdc Over voltage (maximum) Vdc Reverse polarity (maximum) Vdc Output voltage span (options) X, XY and XYZ** Code 25 Vdc

Vdc

Code 30 Vdc Code 40 Vdc Vdc

Hall effect Infinite

5 ± 0.5 regulated transient free

15 continuous

14.5

Gate option Minimum Nominal Maximum

1, R, D, C, P 1.25 to 3.75 1.10 to 3.90 0.97 to 4.03

S** 1.67 to 3.32 1.55 to 3.45 1.43 to 3.57

1, R, S D, C, P 1.15 to 3.85 1.00 to 4.00 0.85 to 4.15

1, R, D, C, P 0.65 to 4.35 0.50 to 4.50 0.35 to 4.65

S 1.10 to 3.90 0.80 to 4.20 0.50 to 4.50

** consult sales team for available options