| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | ZA HAN DLE O PTI O N | | |
| | | |
| | | PERFORMANCE ZA, ZA2 Max height above flange mm 80 Maximum diameter mm 39 Operating temperature C -25 to +50 Environmental sealing (IEC 60529) IP65 | | |
| | | ZAS 80 39 -25 to +50 IP65 | | |
| | | |
| | | |
| | | Z AXIS MECHANICAL Handle rotational torque breakout operating maximum allowable H andle mechanical angle H andle action Expected life | | |
| | | Nm 0.1 Nm 0.15 to 0.25 Nm 1 ° ±29 to ±30 Self centering 1 million operations | | |
| | | |
| | | |
| | | Z AXIS ELECTRICAL Analogue track (ZA and ZA2 only) Resolution Track resistance ±20% k<> Track operating angle ° Output voltage range % Center tap voltage (no load) % | | |
| | | Center tap angle Supply voltage - maximum Wiper circuit impedance Power dissipation @ 20C | | |
| | | Virtually infinite 3.1 or 5.4 (ZA2) ±27 7-93 or 25-75 (ZA2) of input
| | |
| | | ± 2.5 30 > 0.1** 0.25(no load) | | |
| | | Vdc M Cl W | | |
| | | |
| | | | |
| | | |
| | | 47 - 53 of applied voltage ** The long life resistive elements require a high impedance load in the wiper circuit to minimise the current flowing through the wiper for optimum conditions | | |
| | | |
| | | |
| | | Z AXIS ELECTRICAL Directional or Centre Switch Switch operating angle ° Supply voltage - maximum Vdc Load current - maximum mA | | |
| | | ZA, ZA2 4 either side of center (± 1) 30 2 (resistive) | | ZAS 20 either side of center (± 2) 30 2 (resistive) | | |
| | | |
| | | |
| | | DIMENSIONS Note: drawings not to scale | | |
| | | Installation note The protective rubber cap must be removed before fitting the joystick through the mounting hole. Re-fit the rubber cap after mounting in the panel. | | |
| | | |
| | | |
| | | leads exit from the underside of the mounting flange. PVC insulated 7/0.2 (24AWG) flying leads, 240mm long Description Flylead colour | | |
| | | |
| | | ZA | | ZAS | | |
| | | |
| | | Z axis positive voltage supply Yellow/Red Z axis center tap Blue Z axis negative or zero voltage supply Violet Z axis output voltage signal Pink Z switch track N/O (handle CW + Z) Yellow/Back Z switch track N/O (handle CCW -Z) White/Red Z switch track co mmo n Red/ Bue | | |
| | | Yellow/Back White/Red Red/Blue | | |
| | | |
| | | 19 | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |