| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | | | | | | | | | | | Output option | Supply voltage range Vdc | EICT | BCT with | EICT with | | | | | Single or (Dual) supply | | VM option card | CM option card | | | | 0.5 - 4.5Vdc | 10 - 60 or ±(10 - 30) | / | N/A | N/A | | | | 0 - 5Vdc | 10 - 30 or ±(10 - 30) | N/A | | N/A | | | | 0 - 10Vdc | 13.5 - 30 or ±(13.5 - 30) | N/A | / | N/A | | | | ± 2.5Vdc | 10 - 30 or ±(10 - 30) | N/A | / | N/A | | | | ±5Vdc | 10 - 30 or ±(10 - 30) | N/A | / | N/A | | | | ± 7.5Vdc | 13.5 - 30 or ±(13.5 - 30) | N/A | / | N/A | | | | ± 10Vdc | 13.5 - 30 or ±(13.5 - 30) | N/A | | N/A | | | | 4 - 20mA | 10 - 30 or ±(10 - 30) | N/A | N/A | | | | | Slope reversal | | | | | | | | | | | | | | |
| | | OUTPUT | | |
| | | |
| | | |
| | | Continual development of output options means we are working on PWM and CAN output options. Please ask for details | | |
| | | |
| | | DIMENSIONS Note: drawings not Id scale | | |
| | | 25.00 | | |
| | | 78.10 66.00* | | |
| | | 8.50 | | |
| | | |
| | | |
| | | 26.00 | | |
| | | |
| | | |
| | | |
| | | To fit rail Din EN50022 or Din EN50035 Gain adjustment -Zero adjustment - | | |
| | | |
| | | | | |
| | | 'Bulkhead fixing dimensions Enclosure provided with four fixing holes to accept M5 screw x 30mm long minimum. | | be between 2.5 and 6.0mm diameter to maintain IP66 rating of the enclosure. | |
| | | |
| | | Misconnection of the supply may cause permanant damage | | |
| | | ELECTRI CAL CO N N ECTIONS Screw terminals | | |
| | | |
| | | | | | | | | | | (9) | | VPOS | | | | (8) | | GRD | | | | (7) | | VNEG | | | | (6) | | GND | | | | (5) | | OUTPUT | | | | (4) | | GND | | | | (3) | | GREEN | | | | (2) | | YELLOW | | | | (1) | | BLUE | | | | | | | | | | |
| | | —O +V supply -O 0V supply —O -V supply (Dual supply only) -O 0V return —O Voltage (current) output | | |
| | | |
| | | |
| | | _V Screen A Case | | |
| | | |
| | | |
| | | CORE | | |
| | | |
| | | Retract | | Extend | | |
| | | |
| | | Note: refer to the HCTset-up guide for details on how to connect to a split rail power supply. | | |
| | | |
| | | Normally available from stock | | |
| | | |
| | | ORDERIN G CODES | | EICT - standard module with 0.5 to 4.5 Vdc output | | |
| | | |
| | | |
| | | ACCESSO RI ES order separately | | VM - voltage module output option card CM - current module output option card | | |
| | | |
| | | |
| | | 9 | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |