| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | D LS | | P9 6 | | |
| | | SERI ES | | |
| | | |
| | | |
| | | Series P96 Draw Wire Linear sensors have a choice of three measurement ranges with three analogue and one digital output signal. Mounting grooves on four sides of the housing facilitate quick and flexible mounting. The series has an attractive price/performance ratio based on state of the art technology, and is suitable for a range of industrial applications where large measurement ranges can be measured from a compact sensor footprint. | | |
| | | |
| | | PERFO RMAN CE Measuring range mm Output types (See data on page 10 for details) Independent linearity P/U/I±% | | |
| | | 2000 2500 3000 | | |
| | | |
| | | | | FU/I 0.1 | | E | |
| | FU/I 0.1 | | | |
| | | |
| | | |
| | | E | | ± % | | 0.02 | | |
| | | | |
| | | |
| | | Virtually infinite | | |
| | | Resolution Sensor element | | |
| | | |
| | | Y | | Y | | |
| | | |
| | | Y | | |
| | | |
| | | Wire acceleration g 8 Wire extension force max. N 10 Wire retraction force min. N 5 Wire misalignment max. ° 3 | | |
| | | 9 5.5 | | 9 5.5 | | |
| | | |
| | | |
| | | Operational temperature Protection class Vibration IEC 68-2-6 Shock IEC 68-2-27 Weight | | |
| | | -20 to +80 IP65 (only if plug is connected to socket) 20g, 20Hz - 2kHz 50g, 5mS 1100 | | |
| | | g | | |
| | | |
| | | |
| | | Materials H ousing Measuring wire Sensor attachment Wire attachment | | |
| | | Auminium, anodised Coated polyamid stainless steel Mounting grooves in the housing Wire clip | | |
| | | |
| | | |
| | | AVAI LABI LI TY ORDERING CODES AN D O PTI O N S | | |
| | | Options CA-P available from stock. Ask our sales office for details on other options DLS - .... - P96 - .... - .... | | |
| | | |
| | | Measuring range | | |
| | | Output P = Potentiometer (2000/2500mm only) U = Voltage (2000/2500mm only) I = Current (2000/2500mm only) E = Incremental encoder (3000mm only) | | |
| | | |
| | | |
| | | Connection SR = Radial plug for outputs U and I CA = Axial cable for output P CR = Radial cable for output E | | |
| | | |
| | | |
| | | 6 | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |