Joystick Controllers - Finger Operated
28Pages

{{requestButtons}}

Catalog excerpts

Joystick Controllers - Finger Operated - 2

The Penny+Giles range of finger operated joystick controllers have beendeveloped for the smooth, precise control of critical functions in a variety of industrial applications where a Human-Machine Interface (HMI) is required. Available in one, two or three axis configurations, the finger operated range has a choice of six different models, with ergonomic handle styles to enable superb proportional control. Each model has a range of selectable options for the most comprehensive matching of the joystick to your application. > ?Potentiometeric or Hall effect sensing?Single and multi-axis...

Open the catalog to page 2
Joystick Controllers - Finger Operated - 3

The Penny+Giles joystick range are displacement joysticks that provide electricalsignals in direct proportion to the movement of the lever. Two different types ofsensing technology are utilised in the finger operated controller range. The JC025, JC030, JC100, JC120 and JC400 models use long life potentiometertracks with directional/center switching, and the JC2000 model uses non-contact Halleffect sensors. Potentiometric sensing Designed to interface with an electronic controller, the long-life potentiometer tracks generate analogue outputs withswitched reference signals that are...

Open the catalog to page 3
Joystick Controllers - Finger Operated - 4

By using design innovation, careful materials selection and extensive real-lifeapplications knowledge, Penny+Giles engineers have developed a range ofjoystick controllers that require no maintenance throughout an expected workinglife of greater than five million operations (fifteen million operations for theJC2000). We also fit standard electronic connectors to the majority of our joysticksto help reduce both your installation time and the potential for wiring errors duringyour manufacturing process. > Joysticks fitted with the long-life potentiometer tracks can have additionalresistors...

Open the catalog to page 4
Joystick Controllers - Finger Operated - 6

Developed for applications where compact size and minimal above panel height is paramount, the JC025 and JC030 rockers arevery low profile whilst still providing precise fingertip control in one axis. The use of these rockers in a control panel allowsdesigners to develop very low profile assemblies whilst still maintaining the functionality of a much larger single axis joystick.These rockers have been designed for maintenance-free operation throughout an operating life of greater than five million operations. Typical applications include remote control chest packs, pendant controllers, low...

Open the catalog to page 6
Joystick Controllers - Finger Operated - 7

Track resistanceNo option on rocker profile for JC030 N =1.8k0-100% E =5k 0-100% R =2k10-90% Q =2.9k25-75% > JC025 It is recommended that the JC025 is fitted from the back of the mounting panel using four M3 x 6mm female, self-clinching stand-offs (e.g. PEM ref. CSS M3-6) fitted to the back of the panel at opposite positions. The stand-offs are used in conjunction with four M3 x 6mm pan head screws. The panel cut-out and centers for the stand-offs are as shown in the panel mounting detail below. The recommended panel thickness is 3mm. The O ring supplied must be used to seal the JC025rocker...

Open the catalog to page 7
Joystick Controllers - Finger Operated - 8

Developed for applications where ergonomics and system integrity are paramount, the JC100 is a compact, low profile joystickthat provides smooth, precise fingertip control in one axis. The JC100 is sealed to IP66 to enable it to operate in extreme environments. With all the components contained within the handle, and standing only 70mm high, it is ideal for mounting in low profile panels and arm rests. Installation time has been reduced through the use of a standard electronic connector, and thejoystick has been designed for maintenance-free operation throughout its operating life of...

Open the catalog to page 8
Joystick Controllers - Finger Operated - 9

0-100% output voltage range, 4k JC100-006 10-90% output voltage range, 5k JC100-002 25-75% output voltage range, 5k JC100-007 Mating connector kit SA47269 It is recommended that the JC100 joystick is fitted from the top of the mounting panel using four M3 screws (not supplied). The panel cut-out and centers for the screw positions are as shown in the panel mounting detail below. > JC100 > 46 34 +Y Axis forward4 holes through 3.5 4 holes tosuit M3 screws 70 5 714Mating connectorfitted (max) GFEDCBA Note: Connectoroffset to allow pinidentification 28.5 46 36 24 15 R 3 4 places Panel mounting...

Open the catalog to page 9
Joystick Controllers - Finger Operated - 10

Developed for applications where ergonomics and system integrity are paramount, the JC120 is a minimum width, low profilejoystick that provides smooth, precise fingertip control in one axis with a choice of two lever lengths. The JC120 is sealed to IP66to enable it to operate in extreme environments. Standing only 54 or 64mm high, the JC120 is less susceptible to unintentional operation. With all of the components contained within the handle, it is ideal for mounting in low profile panels and arm rests.Installation time has been reduced through the use of a standard electronic connector,...

Open the catalog to page 10
Joystick Controllers - Finger Operated - 13

Recommended panel thickness 3.5 to 6mm > Note: drawings not to scale Recommended screw torque > Rectangular flange(codes B, D & F) The JC400 joystick has three options for each mounting flange style, which include through holes and thread inserts in the 4mm diameter holes. To maintain an effective seal between the joystick flange and the mounting panel, the mounting screws should be tightened to a suitable torque to match the selected attachment screw size. > 47Lever forward +Y - orientation mark on base Round flange(codes A, C & E) X axis connectionsY axis connectionsLever right (+X) 4...

Open the catalog to page 13
Joystick Controllers - Finger Operated - 14

Round flange, 59.8mm diameter with 4 x 4mm through holes A Rectangular flange, 47 x 57mm with 4 x 4mm through holes B Round, as code A, but with Metric thread inserts (M3 x 0.5p) C Rectangular, as code B, but with Metric thread inserts (M3 x 0.5p) D Round, as code A, but with Unified thread inserts (4-40 UNC x 0.025) E Rectangular, as code B, but with Unified thread inserts (4-40 UNC x 0.025) F Single axis with analogue track Y Dual axis XY Analogue potentiometer, 4k, 0-100%, 5directional switch NN Analogue potentiometer, 5k, 10-90%, ѱ5directional switch RR Analogue potentiometer, 8k,...

Open the catalog to page 14
Joystick Controllers - Finger Operated - 16

Recommended panel thickness > 3.5 to 6mm > Note: drawings not to scale Recommended screw torque The JC400 joystick has three options for each mounting flange style, which include through holes and thread inserts in the 4mm diameter holes. To maintain an effective seal between the joystick flange and the mounting panel, the mounting screws should be tightened to a suitable torque to match the selected attachment screw size. > Round flange(codes A, C & E) 47Lever forward +Y - orientation mark on base Lever right (+X) 4 holes (4)(or with inserts as order code) Rectangular flange(codes B, D &...

Open the catalog to page 16

All CURTISS-WRIGHT catalogs and technical brochures

  1. S-Drive

    2 Pages

  2. AES-350

    18 Pages

  3. AES-349

    25 Pages

  4. SBW

    3 Pages

  5. SCM100

    3 Pages

  6. wm-67

    2 Pages

  7. wm-672

    2 Pages

  8. wm-674

    1 Pages

  9. wm-68a

    2 Pages

  10. wm-762

    2 Pages

  11. wm-763

    2 Pages

  12. wm-764

    2 Pages

  13. WM-777

    2 Pages

  14. WM-782

    3 Pages

  15. WM-783

    3 Pages

  16. WM 784

    2 Pages

  17. wm-80

    2 Pages

  18. WCS-133284

    5 Pages

  19. WM 81

    2 Pages

  20. WCS-134143

    5 Pages

  21. AES-204

    13 Pages

  22. ML1951

    1 Pages

  23. ML1441 AC

    1 Pages

  24. WM526

    2 Pages

  25. JC050

    2 Pages

  26. JC040

    2 Pages

  27. RF15 Series

    2 Pages

  28. RF11 Series

    2 Pages

  29. PGF7000

    1 Pages

  30. On-Highway

    4 Pages

  31. GK1037

    1 Pages

  32. GK0730

    1 Pages

  33. GD1444

    1 Pages

  34. SRH220DR

    2 Pages

  35. STT280

    2 Pages

Archived catalogs