Catalogues - product-guide - penn-engineering-fastening-technologies

Catalogue Product Guide

www.pennfast.com

print

switch display

Page

/ 12

Contact the
Manufacturer

Where to buy
this product ?

PENN Engineering Fastening Technologies - 68124, 2137

/ 12

See all the products PENN Engineering Fastening Technologies

Text version of the page

PENI® FASTENERS


	FLUSH-MOUNTED PANEL SCREWS (Bulletin PF)
		TYPES	GENERAL INFORMATION
		PR10, PS10, N10, F10	Captive screws with self-clinching retainers can be flush mounted into sheets as thin as .125" / 3.2 mm. Thread sizes #4 to #10 and M3 to M5.


	PAN	EL INDUSTRIAL FASTENER ASSEMBLIES (Bulletin P			F)
	f		TYPES	GENERAL INFORMATION
	f		PF13, PF13M, PF14, PF14M	Universal slot/Phillips recess. Type PF13 (knurled cap) meets UL 508 "operator access area" requirements. Type PF14 (smooth cap) meets UL 1950 "service access area" requirements.


	HYBRID™ PANEL FASTENERS (Bulletin PF)
		TYPES	GENERAL INFORMATION
		PFP	Self-clinching panel fastener assemblies with a standard black ABS knob with a steel retainer and screw. Non-stocked standard colors and custom colors are available.


	SPRING-LOACED, PLUNGER ASSEMBLY ,Bu,le,in PF,
		TYPES	GENERAL INFORMATION
		PTL2	Used as a retractable drawer-guide stop, indexing pins and latch detents. Can be locked in retracted position. Plunger diameter .250" / 6.4 mm.


	HYB	RID™ PAI	MEL THUMBSCREWS (Bulletin		PF)
	p		TYPES	GENERAL INFORMATION
	p		PFT	Thumbscrews with a standard hand or tool actuated black ABS knob. Non-stocked standard colors and custom colors are available.

	PAN	EL FASTENER ASSEMBLIES (Bulletin PF			^:)
			TYPES	GENERAL INFORMATION
			PFC2, PFS2	Completely pre-assembled spring-loaded panel fasteners that meet UL 508 "operator access area" requirements. Thread sizes #4 to 1/4" and M3 to M6.

HYBRID™ FLOATING PANEL FASTENERS (Bulletin PF)


		TYPES	GENERAL INFORMATION
		PFF	Floating panel fasteners that can be installed into any panel material with tool or finger operation, and can compensate for up to .06071.52mm mating hole misalignment.


		TYPES	GENERAL INFORMATION
		PF50 PF60	Low-profile panel fasteners with a large head and Phillips recess for tool or finger operation. Available with smooth cap (Type PF60) for limited access.

	ACCESS HARDWARE FOR STAINLESS (Bulletin PF)
		TYPES	GENERAL INFORMATION
		PFC4	Specially hardened stainless steel access hardware for use in stainless steel sheets.


	PHILLIPS DRIVE PANEL FASTENERS (Bulletin PF)
	H *	TYPES	GENERAL INFORMATION
	H *	PFC2P	Panel fasteners that are tool-only to meet UL 1950 "service area access" requirements. Thread sizes #4 to 1/4" and M3 to M6.



	f	TYPES	GENERAL INFORMATION
	f	PF30, PF31, PF32	Panel fasteners with a low-profile design with a large knurled head that can be tool or hand actuated. Thread sizes #4 to 1/4" and M3 to M6.


	PEMHEX® SELF-LOCKING FASTENERS (Bulletin PL)
		TYPES	GENERAL INFORMATION
		PL, PLC	Trademarked blue nylon locking element (for unified fasteners) prevents thread galling. Locking performance meets NASM25027. Thread sizes #4 to #10 and M3 to M5.


	PAN	EL FASTENER ASSEMBLIES (Bulletin P			F)
			TYPES	GENERAL INFORMATION
			PF11 PF11M, PF12, PF12M	Universal slot/Phillips recess. Type PF11 (knurled cap) meets UL 508 "operator access area" requirements. Type PF12 (smooth cap) meets UL 1950 "service access area" requirements.


	NYLON INSERT SELF-LOCKING NUTS (Bulletin PL)
	&	TYPES	GENERAL INFORMATION
	&	CFN	Broaching nuts for use in thinner sheet, close-to-edge applications. The locking element provides prevailing torque to eliminate loosening of mating threaded hardware.

PennEngineering • www.pemnet.com PG-5

DirectIndustry's Virtual Technical Library: PDF Catalogue | Technical Documentation | Brochure | Manual | Industrial directory | Specifications | Characteristics

Search

Go

p.1

p.2

p.3

p.4

p.5

p.6

p.7

p.8

p.9

p.10

p.11

p.12