| | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | PEM® FASTENERS | | |
| | | |
| | | | | | | | | | | LOW DISPLACEMENT HEAD STUDS (Bulletin FH) | | | | / | TYPES | GENERAL INFORMATION | | | | FHL, FHLS | Installs closer to the edge of a sheet than standard studs without causing that edge to bulge. Flush-head for sheets thickness .040" / 1 mm and greater. | | | | | | | | | | | | | | | | | | BROACHING TYPE PANEL FASTENERS (Bulletin K) | | | | S | TYPES | GENERAL INFORMATION | | | | PFK | Panel fasteners with spring-loaded captive screws for mounting on P.C. boards. Thread sizes #4, #6, and M3. | | | | | | | | | | |
| | | |
| | | | | | | | | | | STUDS FOR STAINLESS STEEL SHEETS (Bulletin FH) | | | | / | TYPES | GENERAL INFORMATION | | | | FH4 | Installs into stainless steel sheets as thin as .040" / 1 mm. For use in sheet hardness of 92 or less on the Rockwell "B" scale. | | | | | | | | | | | | | | | | | | FLARE-MOUNTED STANDOFFS (Bulletin K) | | | | | TYPES | GENERAL INFORMATION | | | | KFB3 | For spacing or stacking PC. boards. Special shank is flared to increase pushout resistance. Thread sizes #4, #6 and M3, M4. | | | | | | | | | | |
| | | |
| | | | | | | | | | | FLUSH-MOUNTED PILOT PINS (Bulletin FH) | | | | | TYPES | GENERAL INFORMATION | | | | TPS | Self-clinching pilot pins satisfy a wide range of positioning, pivot, and alignment applications. The chamfered end makes mating hole location easy. | | | | | | | | | | |
| | | FOILGARD® FASTENERS (Bulletin | | |
| | | |
| | | | | | | | | | | | TYPES | GENERAL INFORMATION | | | | | KPS6 | Used in plated thru-holes in multi-layer PC. boards. The self-expanding shank ensures positive contact with plated thru-holes. Thread sizes #4 to #10 and M3 to M5. | | | | | | | | GROUNDING STANDOFFS (Bulletin K) | | | | | TYPES | GENERAL INFORMATION | | | | 4# | SOAG, SOSG | Used to ground P.C. boards to steel or aluminum chassis. Annular projecting teeth eliminate the need for serrated or starwashers to make good electrical contact with the circuit foil. Thread sizes #4, #6 and M3, M4. | | | | | | | | | | |
| | | |
| | | | | | | | | | | HIGH-STRENGTH STUDS FOR THIN SHEETS (Bulletin FH) | | | | i | TYPES | GENERAL INFORMATION | | | | HFE | Self-clinching studs with an enlarged head diameter that provide high-strength in sheets as thin as .040" / 1 mm. | | | | | | | | | | |
| | | |
| | | |
| | | | | | | | | | | BROACHING TYPE STANDOFFS (Bulletin K) | | | | ê | TYPES | GENERAL INFORMATION | | | | KFE, KFSE | Standoffs available with or without threads for mounting on PC. boards, for spacing or stacking. Thread sizes #4, #6 and M3. | | | | | | | | | | | | | | | | | | BROACHING SNAP-TOP® STANDOFFS (Bulletin K) | | | | | TYPES | GENERAL INFORMATION | | | | KSSB | All-metal standoffs with a spring action to hold a PC board securely without screws or other threaded hardware. | | | | | | | | | | |
| | | |
| | | | | | | | | | | BROACHING TYPE NUTS (Bulletin K) | | | | | TYPES | GENERAL INFORMATION | | | | KF2, KFS2 | Internally threaded fasteners for mounting on P.C. boards. Thread sizes #2 to #10 and M2 to M5. | | | | | | | | | | | | | | | | | | PEMFLEX® SELF-LOCKING FASTENERS (Bulletin LK) | | | | | TYPES | GENERAL INFORMATION | | | | LK, LKS, LKA | The PEMFLEX® design provides NASM25027 locking performance without damaging mating threads. Thread sizes #2 to #10 and M2.5 to M5. | | | | | | | | | | |
| | | |
| | | | | | | | | | | BROACHING TYPE STUDS (Bulletin K) | | | | % | TYPES | GENERAL INFORMATION | | | | KFH | Studs for mounting into P.C. boards which can be used as solderable connectors manufacturer as well as threaded fasteners. Thread sizes #4 to #10 and M3 to M5. | | | | | | | | | | | | | | | | | | | PANEL FASTE | MER ASSEMBLIES (Bulletin P | | | | | | TYPES | GENERAL INFORMATION | | | | PFHV | Low cost panel fasteners with a small, compact design for limited space applications. Thread sizes #4 & #6 and M3 to M4. | | | | | | | | | | | |
| | | |
| | | |
| | | PennEngineering • www.pemnet.com | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | |