| | | | | | | | | | | | | | | | | | |
| | | |
| | | PEM® FASTENERS | | |
| | | |
| | | | | | | | | | | | | FLO | ATING FASTENERS (Bulletin AL | A) | | | | | TYPES | GENERAL INFORMATION | | | | AS, AC | Floating action compensates for mating hole misalignment. Thread sizes #4 to 1/4" and M3 to M6. | | | | | | | | | | | | | | | | | | | | TRI-DENT® SELF-CLINCHING LOCKNUTS (Bulletin CL) | | | | O | TYPES | GENERAL INFORMATION | | | | SL | Locknuts designed with a unique and economical TRI-DENT® locking feature, which meets demanding locking performance requirements. | | | | | | | | | | |
| | | |
| | | | | | | | | | | FLOATING SELF-LOCKING FASTENERS (Bulletin ALA) | | | | (0) | TYPES | GENERAL INFORMATION | | | | LAS, LAC | Floating action with locking threads compensates for mating hole misalignment. Thread sizes #4 to 1/4" and M3 to M6. | | | | | | | | | | | | | | | | | | THIN SHEET SELF-CLINCHING NUTS (Bulletin CL) | | | | 4v | TYPES | GENERAL INFORMATION | | | | | Nuts that feature a lower profile and can be mounted closer to the edge of a sheet than standard self-clinching nuts. | | | | | | | | | | |
| | | |
| | | | | | | | | | | | BLIND FASTENERS (Bulletin B) | | | | \ | > | TYPES | GENERAL INFORMATION | | | | | Used for applications requiring closed | | | | B, BS | thread ends. Blind end limits screw | | | | | | | penetration and excludes foreign matter. | | | | 1 Ì | | | Thread sizes #4 to 1/4" and M3 to M6. | | | | | | | | | | | | | | | | | | | | PEMSERT® FLUSH FASTENERS (Bulletii | 1 F) | | | | | TYPES | GENERAL INFORMATION | | | | F | Industrial fastener remains flush with both sides in sheets as thin as .060" / 1.5 mm. Thread sizes #2 to 1/4" and M2 to M6. | | | | | | | | | | | |
| | | |
| | | | | | | | | | | CONCEALED-HEAD STUDS (Bulletin CH) | | | | | TYPES | GENERAL INFORMATION | | | | CHC, CHA, CFHC, CFHA | Installed into a blind milled hole where surface opposite stud must remain unmarred. Thread sizes #4 to #10 and M3 to M5. | | | | | | | | | | | | | | | | | | MINIATURE FASTENERS (Bulletin FE) | | | | | TYPES | GENERAL INFORMATION | | | | U, UL, FE, FEO, FEX, FEOX | Strong threads in a minimum of space. Available with locking or non-locking threads. Can be installed into sheets as thin as .020" / 0.76 mm. Thread sizes #0 to 1/4" and M2 to M6. | | | | | | | | | | |
| | | |
| | | |
| | | | | | | | | | | | | CON | CEALED-HEAD STANDOFFS (Bulletin CH | ) | | | | Iii | TYPES | GENERAL INFORMATION | | | | CSS, esos | Installed into a blind milled hole where surface opposite standoff must remain unmarred. Thread sizes #4 to 1/4" and M3 to M6. | | | | | | | | | | | | | | | | | | | | SELF-CLINCHING FLUSH-HEAD STUDS (Bulletin FH) | | | | / | TYPES | GENERAL INFORMATION | | | | FH, FHS, FHA, FH4 | Flush-head studs for sheet thickness of .040" / 1 mm and greater. | | | | | | | | | | |
| | | |
| | | | | | | | | | | SELF-CLINCHING NUTS (Bulletin CL) | | | | | TYPES | GENERAL INFORMATION | | | | s, ss, H, HN, HNL, CLS, CLSS, CLA | Strong internal threads in sheets as thin as .030" / 0.8 mm. Thread sizes #2 to 1/2" and M2 to M10. | | | | | | | | | | |
| | | SELF-CLINCHING NON-FLUSH STUDS (Bulletin | | |
| | | | | | | | | | | n | TYPES | GENERAL INFORMATION | | | | TFH, TFHS | Non-flush studs for sheets as thin as .020" / 0.51 mm. Stud head will project above the sheet surface approximately .025" / 0.64 mm. | | | | | | | | SELF-CLINCHI | NG HIGH-STRENGTH STUDS (Bulletin FH) | | | | 4 | TYPES | GENERAL INFORMATION | | | | HFH, HFHS, HFHB | For high-strength applications in sheets as thin as .050" / 1.3 mm. Type HFHB is used for superior electrical/mechanical attachment in copper bus bars. | | | | | | | | | | |
| | | |
| | | | | | | | | | | NUTS FOR STAINLESS STEEL SHEETS (Bulletin CL) | | | | • | TYPES | GENERAL INFORMATION | | | | SP | Installs into stainless steel sheets as thin as .030" / 0.8 mm. Thread sizes #4 to 1/4" and M3 to M6. | | | | | | | | | | |
| | | |
| | | |
| | | PennEngineering • www.pemnet.com | | |
| | | |
| | | | | | | | | | | | | | | | | | |