Wipers and brushes 2017 - 4 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

Catalogue excerpts

PROFILED WIPERS FOR GUIDES always indicate this measurement! always indicate this measurement! always always ! indicate this indicate this measurement! measurement! guide plane guide plane Example of guide mount Example of flange mount Possible method of fastening to guide • For work environments with a heavy concentration of sharp shavings. • Built to drawings in any shape or size. • Single pieces or large series can be manufactured due to no equipment costs. • Polyurethane profile resists abrasion and is easily replaced. • We must have a drawing with measurements showing the profile of the guides to wipe. • Pre-loading is determined by our engineering department based on the shape of the wipe. • The wiper measurements refer to free position without pre-load and it is ALWAYS necessary. to indicate the distance measurement between fastening bore and guide plane to weap. • For fastening, we recommend counter-sunk hex screws. Reproduction of this page is strictly prohibited. Reproduction of this page is strictly prohibited. • Resistant to oils, coolants and hot shavings • Resistant to wear • Wiper profile ha

 Open the catalogue to page 1

BIPLASTIC WIPERS • PEI Biplastic Wipers are modelled on the client drawing. • Strip-lengths are available in prompt delivery. Also available via our online-shop: http://www.pei.eu/index.php/en/shop/wipers Profile: Polyurethane Length: 2000 mm. Rigid polymer insert Profile: Polyurethane Length: 2000 mm. Rigid polymer insert 12 Profile: Polyurethane Length: 2000 mm. Steel insert 18x3 Profile: Polyurethane Length: 2000 mm. Steel insert 12x3 • FB Wipers are modelled on the client drawing or supplied in linear strips. FB 18L Profile: Polyurethane * Length: 530 mm. Stainless steel reinforcement Profile:...

 Open the catalogue to page 2

WIPERS AND BRUSHES RA WIPERS RA Wipers are modelled on the client drawing or supplied in linear strips. Also available via our online-shop: http://www.pei.eu/index.php/en/shop/wipers Profile: NBR * or Viton® Length: 560 mm. Steel insert Profile: Profile:    NBR * Length: 560 mm.    Steel insert Steel insert * Prompt delivery RA B WIPERS RA B Wipers are supplied exclusively in linear strips. Profile: NBR * or Viton® Length: 560 mm. Steel insert RA39L Profile: NBR * or Viton® * Length: 560 mm. Steel insert Reproduction of this page is strictly prohibited. Profile: NBR * or Viton® Length: 800 mm. Steel...

 Open the catalogue to page 3

WIPERS FOR TELESCOPIC STEEL COVERS These types of wipers are normally applied to telescopic steel covers. Codes RA B consists of a metal insert to which an NBR profile has been vulcanized. Codes PR 2 and PR 3 has steel reinforcement and polyurethane profile. Codes PR 4A and D can be instantly replaced on the telescopic cover, without disassembling the cover itself. They have a metal reinforcement with a seal designed to clean the cover. Profile: Polyurethane * Length: 3000 mm. Steel reinforcement Profile: Polyurethane * Length: 3000 mm. Steel reinforcement Profile: Polymeric GM2319 Length: 3000...

 Open the catalogue to page 4

All P.E.I. catalogues and technical brochures

  1. Flat Covers 2017

    19 Pages

    En

Archived catalogues

  1. Flats covers 2015

    17 Pages

    En
  2. Round Bellows

    4 Pages

    En
  3. FLAT BELLOWS

    17 Pages

    En
  4. GENERAL CATALOG

    56 Pages

    En