Mineral Insulated Thermocouple with Standard Plug - Peak Sensors - #1

Text version of the page

Mineral Insulated Thermocouple with Standard Plug Visit the Peak Sensors Online design guide at www.peaksensors.com Type Designation MTS Measuring Range -200 to + 1250 ° C Common Sensor Types K,J,N,T,E Common Diameters Æ 1.5, 3.0, 6.0mm Common Sheaths Inconel, 321 SS, 310 SS, Pyrosil. Connector detail 200 ° C Maximum, IEC Colours (Round pin) Application Notes
Suitable for quick replacement on plants
Can be used on equipment for fast assembly
Tough design for industrial use Special Options
Socket instead of Plug
Duplex
Diameters between 0.5 and 10.8mm
Reduced tips
Sensors bent to shape
Compression Fitting
Weld pads or weld on tips
High vibration schemes
High Temperature Plug/Socket available to 350 ° C
Ceramic Plug/Socket available to 500 ° C
Insulated Exposed or Grounded junction
Tagging The technical information provided on any pages of the Peak Sensors brochure is advisory only and should not be relied on for any design, process or production. We will be pleased to undertake specific technical advisory work under our normal terms of service. Peak Sensors Ltd accepts no responsibility for any loss or damage caused through reliance on any information contained therein. PEAK SENSORS LTD Kelvin House | Station Lane Industrial Estate | Chesterfield | S41 9QX | United Kingdom TEL: +44 (0)1246 261999 | FAX: +44 (0)1246 261888