Cable Resistance Thermometer with Metal Pocket - Peak Sensors - #1

Text version of the page

Cable Resistance Thermometer with Metal Pocket Visit the Peak Sensors Online design guide at www.peaksensors.com Type Designation CRM Measuring Range -100 to + 500 ° C Common Sensor Types 1 Pt 100 B Common Sensor Size 2 x 2.2mm, Thin film Temperature Coefficient 0.3850 W /° C Wiring 3 wire, marked red/red/white Common Pocket Diameters Æ 2.0mm to Æ 12.7mm, Common Insulation PVC, Silicon Rubber, PTFE, Glass fibre Common Stranding 7x0.2 Common Sheaths 316SS, Brass, Aluminium Tail detail 50mm tails, 10mm Tinned Application Notes
A very common sensor type
Fast sensor response possible
The enclosure has many possibilities
Highly engineered pockets are possible
Ideal for high volume manufacture and fixing in to original equipment
Very small sizes available
A wide variety of encapsulants for pocket filling Special Options
Threaded pocket
Machined high tolerance metal enclosure
Cable spring relief available
Partial heat transfer paste filling
Duplex
Higher accuracy sensors A, 1/3,1/5,1/10 DIN
Other stranding options
Pt 50, Pt 500, Pt 1000 and Pt 2000, Cu or Ni Element
2 or 4 wires
RT can be replaced with a thermistor The technical information provided on any pages of the Peak Sensors brochure is advisory only and should not be relied on for any design, process or production. We will be pleased to undertake specific technical advisory work under our normal terms of service. Peak Sensors Ltd accepts no responsibility for any loss or damage caused through reliance on any information contained therein. PEAK SENSORS LTD Kelvin House | Station Lane Industrial Estate | Chesterfield | S41 9QX | United Kingdom TEL: +44 (0)1246 261999 | FAX: +44 (0)1246 261888