Basic Resistance Thermometer Insulated Wire Element - Peak Sensors - #1

Text version of the page

Basic Resistance Thermometer Insulated Wire Element Visit the Peak Sensors Online design guide at www.peaksensors.com Type Designation BRI Measuring Range -100 to + 500 ° C Common Sensor 1 Pt 100 B Common Sensor Size 2 x 2.2mm, Thin film Temperature Coefficient 0.3850 W /° C Wiring 3 wire, marked red/red/white Common Insulation PVC, Silicon Rubber, PTFE, Glass fibre Common Stranding 7x0.2 Tail detail 10mm Stripped & Tinned Application Notes
Inexpensive sensor
Replacement element
For assembly into Sheath
Low thermal mass
Suitable for equipment assemblies Special Options
A range of standard and special housings are available for element protection
Higher accuracy sensors A, 1/3,1/5,1/10 DIN
Other stranding options
Pt 50, Pt 500, Pt 1000 and Pt 2000, Cu or Ni Element
2 or 4 wires
Tagging
RT can be replaced with a thermistor The technical information provided on any pages of the Peak Sensors brochure is advisory only and should not be relied on for any design, process or production. We will be pleased to undertake specific technical advisory work under our normal terms of service. Peak Sensors Ltd accepts no responsibility for any loss or damage caused through reliance on any information contained therein. PEAK SENSORS LTD Kelvin House | Station Lane Industrial Estate | Chesterfield | S41 9QX | United Kingdom TEL: +44 (0)1246 261999 | FAX: +44 (0)1246 261888