Battery Charging Systems - 8 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

Catalogue excerpts

for Automatic Guided Vehicles >

 Open the catalogue to page 1

Insulated collector for vehicle installation, with two contactbrushes and a bristle cleaning brush. Insulated floor contact plate with two copper contact plates. > TypeWeight/kgCat.-No. TypeWeight/kgCat.-No. BLS 200-2-01 2.600590 000 BLK 200-2-01 2.200590 001 > Insulated collector for vehicle installation, with two contactbrushes, surrounding bristle cleaning brushes and two-directional drive-on capability. > TypeWeight/kgBest.-Nr. BLS 200-2 Q-01 3.500590 013 > height at contact position Dimensions in parantheses apply to released contacts

 Open the catalogue to page 3

Insulated collector for vehicle installation, with two contactbrushes each for charging, two pilot contacts and a bristlecleaning brush Insulated Floor contact plate with two copper contact plates forcharging and two pilot copper contact plates. > TypeWeight/kgCat.-No. TypeWeight/kgCat.-No. BLS 200-2/20-2-01 3.000590 198 BLK 200-2/25-2-01 2.700590 062 > Insulated collector for vehicle installation,with two contact brushes Insulated Floor contact plate, with two copper contact plates. > TypeWeight/kgCat.-No. TypeWeight/kgCat.-No. BLS 20-2-01 0.500590 207 BLK 25-2-01 0.700590 042 > height at contact...

 Open the catalogue to page 4

Insulated collector for vehicle installation, with one contactbrush and one bristle cleaning brush (to be used in pairs). Insulated Floor contact plate, complete with single copper contact. > TypeWeight/kgCat.-No. TypeWeight/kgCat.-No. BLS 200-1-01 W 1.300590 035 BLK 200-1-01 W 1.000590 036 > Insulated collector for vehicle installation, with three contactbrushes and one bristle cleaning brush (to be used in pairs). Insulated Floor contact plate, complete with single copper contact. > TypeWeight/kgCat.-No. TypeWeight/kgCat.-No. BLS 600-1A-01 4.100590 043 BLK 600-1-01 3.000590 044 > height at contact...

 Open the catalogue to page 5

Insulated collector for vehicle installation, with two contactbrushes and cover pusher. Insulated Floor contact plate with two copper contacts, spring loaded cover and 2 x 2 m connecting cables. > TypeWeight/kgCat.-No. TypeWeight/kgCat.-No. BLS 200-2E-01 M 2.400590 065 BLK 200-2EA-02 M 3.900590 064 > Insulated collector for vertical installation on the battery char-ger, with two contact brushes Insulated contact plate for vertical installation on side of vehicle, with two copper contacts. > TypeWeight/kgCat.No. TypeWeight/kgCat.-No. LST 200-2E-01 J 36.000590 060 BLK 200-2-01 J 2.300590 014 > height...

 Open the catalogue to page 6

1912 ■ ■ Install AGV-collectors on vehicle with bristle cleaning brushes in direction of travel. ■ ■ Install AGV-Base Plate on top of the floor ■ ■ The > marked height 68 (65, 45) of AGV-Collectors type BLS is the dimensionat contact position. Allowable tolerance: + 2 mm.In order to guarantee sufficient contact pressure the max. wear reduction of the contactbrushes is limited to 5 mm whereby the unevenness of the floor must be considered. ■ ■ Between base plate and cutout at concrete floor a dust- and waterproof sealing has to be installed. > Example of installation BLS 200-2-01 with BLK 200-2-01...

 Open the catalogue to page 7

Catalog No. 1b/E 2005 MANAGEMENTSYSTEMDQS certified in accordance with DIN EN ISO 9001:2000OHSAS 18001 (Reg. no. 003140 QM OH) Catalog No.Copperhead Conductor Systems1aBattery Charging Systems1b Insulated Conductor Systems U 102a Insulated Conductor Systems U 20 U 30 ֖ U 402b Insulated Conductor Systems U 15 U 25 ֖ U 352c Aluminium Enclosed Conductor Systems LSV LSVG3a Powerail Enclosed Conductor Systems KBSL ֖ KSL KSLT ֖ KSG4a Powerail Enclosed Conductor Systems VKS VKL4b Powerail Enclosed Conductor System MKLD ֖ MKLF MKLS4c Powerail Enclosed Conductor System KS֖104d Powerail Enclosed Conductor...

 Open the catalogue to page 8

All Paul Vahle GmbH & Co. KG catalogues and technical brochures

Archived catalogues