Aluminium enclosed conductor systems LSV-LSVG - 32 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

  9. P. 9

  10. P. 10

  11. P. 20

  12. P. 30

Catalogue excerpts

The Vahle Aluminium enclosed Powerails LSV and LSVG arecompact and safe prefabricated Electrification Systems.These systems are ideal for indoor and outdoor use, for alltypes of installations requiring a moving or movable source of electrical power: cranes, monorails, hoists, electric power tools, machine tools, storage and retrieval systems and many other mobile machinery applications. LSV and LSVG are especially well suited for higher ambient temperatures.The principal advantages of these systems are maximum elec-trical and personnel safety, compactness, dependability andminimal maintenance...

 Open the catalogue to page 3

1 m Section2 m Section3 m Section4 m Section > Type HS with PEWeightCat.-WeightCat.-WeightCat.-WeightCat.- SS without PEkgNo.kgNo.kgNo.kgNo. LSV 4/60 HS 3.000190 0016.000190 0029.000190 00312.000190 004 LSV 4/60 Ņ SS Control line3.000190 1016.000190 1029.000190 10312.000190 104 LSV 4/100 HS 3.400190 0416.800190 04210.200190 04313.600190 044 LSV 4/140 Ņ HS 3.700190 0817.400190 08211.100190 08314.800190 084 LSV 4/200 HS LSV 4/300 Ņ HS > For full Type designation add length suffix of Powerail Section, e. g. LSV 4/60 Ŗ 4 HS for Cat.-No. 190 004.Other sections to coincide with your runway requirements...

 Open the catalogue to page 4

leftright short lip profile in front > short lip short lip Extra finish of LSV; surcharge Cat.-No. Index E Index I > anodized housingCat.-No. copper conductors with stainless steel capCat.-No. Cat.-No. 60 A 200 AType LSV 4pole 190 660194 754194 755 min. horizontal radius: 1000 mm Consult factory for vertical bendsSupport spacing750 up to max. 2000 mm, depending on the radius max. L = 3200 mm, max. <) = 120 min. horizontalradius: 1500 mm Consult factory for vertical bendsSupport spacing750 up to max. 2000 mm, depending on the radius max. L = 3200 mm, max. <) = 120а LSV 5pole 190 670194 756194 757...

 Open the catalogue to page 6

ground cable ground cable 4 or 6 sets Hardware 60 - 200 A 4 or 6 plug-in joints 200 2 pegs 1 set joint fish plate 2 pegs 1 set joint cover 4 sets Hardware 300 A 110 TypeWeightCat.-No.Cat.-No.kganodized VBLS 4/5 for 4- and 5-pole0.450195 248 > TypeWeight kgCat.-No. VBLS/E 4/5 60-200 Amp.0.450֖195 255 VBL 4/5 for 4- and 5-pole0.110195 244 VBLS 6/7 for 6- and 7-pole0.505195 250 VBLS/E 6/7 60-200 Amp.0.505֖195 259 VBL 6/7 for 6- and 7-pole0.140195 246 VBLSG 4/5 for 4- and 5-pole0.605195 252 VBLSG/E 4/5 300 Amp.0.605֖195 256 > ground cable ground cable 6,8 or 10 sets Hardware 60 - 200 A 6,8 or 10 plug-in...

 Open the catalogue to page 7

View without -beam Claw suitable for D = 6-15 mm LSV 4/300 LSVG 6/300 > View without -beam Claw suitable for D = 15-25 mm LSV 4/300 LSVG 6/300 EHKL small claw version Attention:Make sure that hoist wheels have enough clearance. Use small claw if necessary. > TypeCat.-No.for std.bracketsCat.-No.with smallclawXmmLmmB max.mmWeightkg EHKL 250 2503501701.070194 210194 300 EHKL 300 3004001701.150194 220194 310 EHKL 400 4005001701.300194 230194 320 > LSVG EHKL 500 5006001701.450194 240194 330 -rail of EHKL is identical to type S 1, Cat. 8a.Select next larger size bracket when your -beam dimen-sion B...

 Open the catalogue to page 8

locating clamp > 65 M 8 > 65 M 8 Type Cat.-No.WeightkgType Cat.-No.Weightkg Type > locating clamp > 70 M 12 > 70 M 12 Cat.-No.WeightkgType Cat.-No.Weightkg >

 Open the catalogue to page 9

L = LH version, R = RH version(see page 6) max. of feed cable:4 & 5pole 1 x PG 29 mm6 & 7pole 1 x PG 29 mmand 1 x PG 21 mm L = LH version, R = RH version(see page 6) max. ؘ of feed cable:for all types 1 x PG 29 mmand 1 x PG 21 mm TypeCat.-No.Weightkg 115 100070 115 Plastic cap with plug-in joints > Type TypeCat.-No.Cat.-No.WeightkgA EKL 0.080190 220 Power line HS with PEPower line HS with PEControl line KEL 4/60 L 192 150 KEL 4/60 R 190 1403.3560 KEL 5/60 L 192 160 KEL 5/60 R 190 1503.5560 Aluminium cap with bolted joints KEL 6/60 L 192 170 KEL 6/60 R 190 1603.7560 KEL 7/60 L 192 180 KEL 7/60...

 Open the catalogue to page 10

Please submit drawings of transfer applications. Specify dimenions a, b, c and angle . > Transfer funnels must not be activated before collectors are fully engaged.Flexible support type tow arms (see page 22) for collectors are essential with contact sections. size="-1">

 Open the catalogue to page 12

BTL 5/140 195 162 BTL 5/200 195 163֖ This section consists of 1 m Powerail with openings covered bya protection hood.The anti-condensation section will be used where Powerails arepassing from indoor to outdoor, preventing the icing of the out- side mounted Powerail as the warm air can escape and does not condensate in the Powerail. BTL 5/300 195 164 BTL 6/ 60 195 165195 168 BTL 6/100 195 166֖ BTL 6/140 195 167 BTL 6/200 195 622֖ BTL 7/ 60 195 169 BTL 7/100 195 170֖ BTL 7/140 195 171 BTL 7/200 195 623֖ > max. 80 m max. 80 m No extra feeds required as the Powerail is not interrupted. > HS with PEControl...

 Open the catalogue to page 17

Cat.-No.A Type Cat.-No.A PolesWeightkgnor-maltrans-ferGeneralfor straight runs andcurves R > 2.5 m for LSV 4/60 and LSV 4/100for straight runsand curves with ball bearing wheelsfor straight runsand curves with ball bearing wheels max. speedm/min. for Power HS with PEfor Control ST without PE > SWK SWK 4/25-1 25250 230 SWK 4/25-1 25250 24040,768060 SWK 4/40-1 40257 394֖40,868060 > 198 SWN 4/40-1 40194 691 SWN 4/25-1 25194 69240,8515080 SWN 5/40-1 40194 69350,9515080 SWN 6/40-1 40194 694 SWN 6/25-1 25194 69561,2015080 SWN 7/40-1 40194 69671,3015080 > 135 SWNT 4/40-1 40194 772 SWNT 4/25-1 25194 77340,8510060...

 Open the catalogue to page 20

1912 F = flexible strap connection for curvesS = rigid bar connection for straight runs > HS with PEfor Control > Cat.-No.A Type for Power HS with PEfor Control > Cat.-No.A Type All ampere data for 60 % intermittent duty. For full Type designation add Power or Control, suffix e.g. DSWK 4/50 F-1 HS for Cat.-No. 250 320DSWNG 6/50

 Open the catalogue to page 21

for single and double collectorflexible support type with single collectorfor tranfer funnel ETL; see pages 13 & 23 for single and double collectorflexible support type with single collectorfor tranfer funnel ETLG; see pages 13 & 23 > 100 60 slotted hole 9 x 20 33590 4525 slotted hole 9 x 18 265 138 43 Type Cat.-No.Weightkg Type Cat.-No.Weightkg Type KWS 0.480250 380 KFM 1.160250 390for SWK KWS/K > 0.480252 340 KFML 1.170250 970for SWN and SWNT > 5737 1530231280 9 38090 slotted hole 9 x 18 ؘ 20 440 165 Cat.-No.Weightkg Type Cat.-No.Weightkg GKM 0.620260 350 GFM 1.300260 360for SWNG/FM GKM/K >

 Open the catalogue to page 22

All Paul Vahle GmbH & Co. KG catalogues and technical brochures

Archived catalogues