Text version of the page

A51PR,A51PR3 Punch &Die Sets 1/2 in. and 3/8 in.

Pellet Press Bulletin - 28323 Dimensions & WeightsOrdering Guide

Length of lever arm7 in.Maximum punch stroke1.25 in. Depth of cavity in:.50 and .375 inch dies1 in. .25, .125 and metric dies.75 in.Dimensions of press base5 x 9 in. Overall press height10 in. Weight of assembled press17 lb. Gross shipping weight20 lb. Extra Punch and Die Sets* Size of Punch Model No.& Die Set Size of Punch Model No.& Die Set Die Holder 2810 Pellet Press None 2811 Pellet Press.50 in. 2812 Pellet Press.25 in. 2813 Pellet Press.375 in. 2814 Pellet Press.125 in. 2815 Pellet Press3.0 mm 2816 Pellet Press4.5 mm A51PR.50 in. dia.A51PR2.25 in. dia. A51PR3.375 in. dia. A51PR4.125 in. dia. A51PR53 mm dia. A51PR64.5 mm dia. 40PR2 A51PR2 and Smaller Punch and Die Sets 1/4 in., 1/8 in., 3mm, and 4.5 mm 40PR2 Die Holder*These punch and die sets include the bolt andwasher or fastener for the punch, but no die holder. A 40PR2 die holder must be added when using any of these sets to replace the A33PR punch and die arrangement used in earlier models of the Parr press.

211 53rd StreetMoline, Illinois 61265 USA Phone: 1-309-762-7716 or 1-800-872-7720 Fax: 1-309-762-9453 E-mail: parr@parrinst.com http://www.parrinst.com

Bulletin 2811 500 0506Printed in USA