Snap-tite H, IH & PH Series General Purpose Hydraulic and Pneumatic Quick Couplings
8Pages

{{requestButtons}}

Catalog excerpts

Snap-tite H, IH & PH Series General Purpose Hydraulic and Pneumatic Quick Couplings - 1

Snap-tite H, IH & PH Series General Purpose Hydraulic and Pneumatic Quick Couplings Many Standard Configurations Suitable for Hydraulic and Pneumatic Applications: Snap-tite H Series couplings have been proven by years of use on hydraulic and pneumatic applications. H Series is best suited for general purpose fluid applications where either single or double shut-off valving is desired. A wide range of sizes, materials and end configurations are available. PH version couplers and nipples are valved with a connect-under-pressure feature. These steel couplers and nipples allow connection with H Series valved couplers and nipples when there is residual pressure on the PH coupler/nipple side. IH version couplers are steel with a cylindrical valve designed specifically for pneumatic use. When paired with an unvalved/plain H Series nipple, it functions as a durable single-shut-off connection. Contact Information: Parker Hannifin Corporation Quick Coupling Division 8145 Lewis Road Minneapolis, MN 55427 • Sizes 1/4"-4" • Available in steel, brass, aluminum and 316 stainless steel • Seal material options available • Optional sleeve lock helps to prevent accidental disconnection • Double-shut-off version has low pressure drop • Manually operated sleeve provides secure connection

Open the catalog to page 1
Snap-tite H, IH & PH Series General Purpose Hydraulic and Pneumatic Quick Couplings - 2

Technical and Dimensional Information H Series couplings are suitable for general purpose applications and a variety of media. They are very versatile in material, size and end configuration. Valve combinations include: - Double shut-off poppet valves - Single shut-off on the coupler or nipple side - Straight through (unvalved/plain) Postive Ball-Lock Design Two -Piece Body Construction PH version couplers and nipples make it possible to overcome the high connection force caused by residual pressure. The poppet valves have an added pressure relief feature to allow connection under static...

Open the catalog to page 2
Snap-tite H, IH & PH Series General Purpose Hydraulic and Pneumatic Quick Couplings - 3

Valved and Valved (Double Shut-off) Valved and Plain (Single Shut-off) Valved and Valved (Double Shut-off) Flow Charts PH Series FLOW RATE (LPM)

Open the catalog to page 3
Snap-tite H, IH & PH Series General Purpose Hydraulic and Pneumatic Quick Couplings - 4

Valved Coupler and Nipple Dimensions (without end fitting) SEE END FITTING ENGAGEMENT LENGTH Valved Coupler and Nipple End Fitting Dimensions Size Male Tapered Pipe Female Tapered Pipe Female RP4 British Parallel

Open the catalog to page 4
Snap-tite H, IH & PH Series General Purpose Hydraulic and Pneumatic Quick Couplings - 5

Unvalved/Plain Coupler and Nipple End Configurations B H E (Hex) Female RP British Parallel Thread J Female Pipe Thread Male Pipe Thread NOTES: *1 Dimensions taken across the hex flats. Round stock with two milled flats may be substituted for hex stock. Dimensions across flats same as dimensions across hex flats. Max O.D. of round stock will not exceed the dimensions across the points of the hex stock. Valve coupler and nipple bodies may be supplied from round bar stock without wrench flats. H E (Hex) *2 Notch on hex indicates RP British parallel threads. Accessories Dust caps, dust plugs...

Open the catalog to page 5
Snap-tite H, IH & PH Series General Purpose Hydraulic and Pneumatic Quick Couplings - 6

Sleeve Lock Option: SL = Helps to prevent accidental disconnection G Seals: F Blank = Nitrile (Code A) JF = Military variation of Nitrile for hydrocarbon fuels M = Military variation of Nitrile G for MIL-H-5606 fluids F V = Fluorocarbon E = Ethylene Propylene End Fitting Type: M = Male NPT F = Female NPTF3 EF = Female SAE EM = Male SAE 37° Flare EB = Bulkhead SAE RP = Female British Parallel BS2779 End Fitting Size: 2 = 1/8" 20 = 1-1/4" 4 = 1/4" 24 = 1-1/2" 6 = 3/8" 32 = 2" 8 = 1/2" 40 = 2-1/2" 12 = 3/4" 48 = 3" 16 = 1" 64 = 4" 49 = MS33649 Female 56 =F MS33656 37° Male Flare 57 = MS33657...

Open the catalog to page 6
Snap-tite H, IH & PH Series General Purpose Hydraulic and Pneumatic Quick Couplings - 7

Replacement Parts Valve Kits Valve Seals Coupler Interface Seals Includes valve, valve spring and stop. Valve seal is included in sizes 3/8" thru 1" in steel, brass and aluminum only. Part Number – Use the base part number followed by SPK. Example: VHC4-SPK VIHC6-SPK 1/4" valve seal is staked in the coupler and nipple bodies in all materials and is not considered field repairable. 3/8" and above are available for repair. Part Number – "H (size)-55 (seal material)" Example: H6-55A* H8-55A* Includes O-ring and back-up ring. Part Number "H (size)-56-9 (seal material)". Example: O-ring and...

Open the catalog to page 7
Snap-tite H, IH & PH Series General Purpose Hydraulic and Pneumatic Quick Couplings - 8

©2013 Parker Hannifin Corporation ENGINEERING YOUR SUCCESS.

Open the catalog to page 8

All Parker Quick Coupling Division catalogs and technical brochures

  1. NSG series

    2 Pages

  2. UQD series

    2 Pages

  3. 2600 Series

    1 Pages

  4. ST Series

    3 Pages

  5. SM Series

    3 Pages

  6. PF Series

    3 Pages

  7. 6100 Series

    3 Pages

Archived catalogs