PEEK™ Tubing - Parker Parflex - #2

Text version of the page

© 2008 Parker Hannifin Corporation Bulletin TEX-401D May 08 PEEK™ is a registered trademark of Victrex PEEK™ Attributes PEEK™ Applications -Medical -Nuclear -Analytical Instrumentation -Pharmaceutical -Semiconductor -Chemical Processing -Aerospace -Electronics -Hydrolysis TYPICAL SIZES Sizes Range from .010” up to 2” PEEK™ Typical Sizes - Monofilament OD MM size tolerance size tolerance .010 + .002 .254 + .051 .031 + .002 .787 + .051 .062 + .003 1.57 + .076 .093 + .004 2.36 + .102 .125 + .005 3.18 + .127 PEEK™ Typical Sizes - Capillary Tubing ID OD inch mm inch mm .005 + .002 .127 + .051 .062 + .003 .157 + .076 .010 + .002 .254 + .051 .062 + .003 .157 + .076 .015 + .002 .381 + .051 .062 + .003 .157 + .076 .020 + .003 .508 + .076 .062 + .004 .157 + .102 .025 + .003 .762 + .076 .062 + .004 .157 + .102 PEEK™ Typical Sizes - SmoothboreTubing ID Wall inch mm inch mm .051 + .002 1.29 + .051 .010 + .002 .254 + .051 .092 + .003 2.34 + .076 .015 + .003 .381 + .076 .165 + .004 4.19 + .102 .020 + .003 .508 + .076 .300 + .005 7.62 + .127 .025 + .004 .635 + .102 .425 + .005 10.7 + .127 .025 + .004 .635 + .102 PEEK™ Properties MECHANICAL PROPERTIES Properties ASTM Unit PEEK™ Specific Gravity D792 1.30~1.32 Tensile Elongation D638 % 20~60 Tensile Strength D638 psi 14,065~14,500 Flexural Strength D790 psi 24,650 Compressive Strength D695 73°F/23°C 17,110 Tensile Elastic Modulus D638 psi 500,000 Flexural Modulus D790 psi 580,000~594,500 Hardness Durometer D785 R126~M99 Coefficient of Friction Dynamic (<10ft/min) 0.18 Impact Strength IZOD 73°F/23°C ISO180 notched ft/lbs/in unnotched ft/lbs/in 1.12~1.38 no break ELECTRICAL PROPERTIES Dielectric Constant D150 350°F(177°C) 50Hz-10kHz 3.2-3.3 392°F(200°C) 50Hz-10kHz 4.50 Dissapation Factor D150 .003 Dielectric Strength D149 .002 in. film KV/ CM-1 190 Volume Resistivity D257 ohm-cm 4.9 x 1016 Surface Resistivity ohm/sq 2.0 x 1016 GENERAL PROPERTIES Water Absorption, 24h D570 % <0.05 Color Amber/Tan