Fluoropolymer Tubing Overview - Parker Parflex - #6

Text version of the page

U.S./Canada: 800-423-6551 • Fax: 800-438-9562 • International: (1)817-625-5081 • Fax: (1)817-624-9095 web site: www.texloc.com • e-mail: texloc@parker.com • 4700 Lone Star Blvd. Fort Worth, Texas 76106 • U.S.A. For Ordering Information, Questions or Comments Call: 800-423-6551 or Visit: www.texloc.com Thermal Properties Electrical Properties General Properties High Performance Thermoplastics Properties ASTM UNIT PEEK™ Mechanical Properties Specific Gravity D792 1.30-1.32 Elongation D638 % 20-60 Tensile Strength D638 psi 14,065-14,500 Flexural Strength psi 24,650 Compressive Strength D695 17,110 Tensile Elastic Modulus (Young’s Modulus) D638 psi 522,000 Flexural Modulus 103 MPa (103kgf/cm2) D790 594,000 Hardness Durometer Shore D85-D86 Coefficient of Friction D1984 Static 0.24 Abrasion Resistance Taber 1000 revs. na Impact Strength IZOD D256 Notched 73°F/23°C ft/lbs/in 1.6 Melting Point °C 340 (°F) (644) Upper Service °C 260 Temp. (20,000h) (°F) (500) Flammability UL 94 V-0 Thermal Conductivity BTU- C177 1.73 in/hr.ft2°F Watts/m°C na Linear Coefficient of Thermal Expansion 10-5 °F-1 2.6 Heat Distortion °C 152 (°F) (306) Dielectric Constant D150 50HZ- 3.20-3.30 10kHZ Dielectric Strength v/mil >500 10 mil Volume Resistivity D257 ohm-cm 4.9 x 1016 Surface Resistivity ohm/sq. 2.0 x 1016 Chemical/Solvent Resistance Excellent Water Absorption, 24h D570 % 0.5 Refractive Index na Limiting Oxygen Index D2863 % 24 Poisson’s Ratio D638 0.4 Properties ASTM UNIT PEEK™ PEEK™ (Polyetheretherketone) Working Temperature: 500°F (260°C ) Color: Light Tan • Excellent steam resistance • Excellent chemical resistance • Excellent strength to weight ratio • Outstanding wear resistance • Excellent outgassing characteristics • Self extinguishing • Exceptional tensile strength Burst Pressure PTFE Tubing at Room Temperature 1000 900 800 500 600 700 300 200 100 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 7/8 1 400 INSIDE DIAMETER - INCHES COLORS DENOTE WALL THICKNESS This chart is intended to be used as a general guide only. Since listed ratings are for ideal conditions, all factors affecting the tubing and the tubing application must be considered. TEX-20071 TM