| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | Accumulators | | Piston and Bladder | | |
| | | |
| | | Parker's comprehensive range of CE approved piston accumulators maintains high pressure for industrial safe braking and manoeuvring. Ride control and load/boom damping systems enhance productivity and improve the operator's environment, while greater system efficiency and reduced pump sizes give longer life with lower whole-life costs. | | |
| | | |
| | | A Series • Standard capacities from 0.1 to 76 litres • 250 bar and 350 bar operating pressures • Bore diameters from 50 mm to 200 mm • Industrial seal compounds to suit all standard fluids and operating temperatures | | |
| | | |
| | | za_01 | | |
| | | |
| | | ACP Series • Standard capacities from 0.08 to 0.95 litres • Up to 275 bar operating pressures • 40 mm and 50 mm bore diameters • Rechargeable or sealed-for-life designs • High strength crimped construction | | |
| | | |
| | | za_03 | | |
| | | |
| | | • 11 standard capacities from 0.075 litres • Flow rates up to 60 1/min | | |
| | | |
| | | to 3.5 litres • Up to 250 bar maximum working pressure depending on model • Nitrile and epichlorohydrine bladder compounds for operating temperatures from -30°C to +80°C | | |
| | | • BSPP threaded ports as standard; other | |
| | | |
| | | thread forms available to order • Meet conformity assessment procedures | | |
| | | |
| | | of PED 97/23/EC | | |
| | | |
| | | |
| | | za_07 | | |
| | | |
| | | Accumulator Charging Kits and Mounting Accessories | | |
| | | |
| | | Charging and gauging equipment Gauge adapters and assemblies Mounting clamps and base brackets U-bolt mounting assemblies Accumulator repair tools | | |
| | | ■ | | |
| | | |
| | | ■ | | |
| | | |
| | | ■ | | |
| | | |
| | | ■ | | |
| | | |
| | | ■ | | |
| | | | za 01 | | |
| | | |
| | | |
| | | 28 | | Parker Hannifin Corporation Hydraulics Group | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |