Rod Type Cylinders - Parker Hannifin GmbH - #151

Text version of the page

Characteristics Magnetic Switches electronic C€ Séries RS Characteristics Symbol Unit Description Electrical Characteristics Type RS Type ES Switching output Reed PNP/NPN Operating voltage V (5 DC) 10-240 AC/DC (NO) (5 DC) 10-150 AC/DC (NC) (5 DC) 10-70 AC/DC plug 10-30 DC Voltage drop V < 3 < 2 Connection technology 2-wire 3-wire Switching function Normally open/closed Normally open Permanent current mA < 200 Breaking capacity W < 100 Power consumption mA - < 20 Function indicator LED, yellow Response time ms < 2 < 2 (on) Sensitivity mT 2...4 2...4 Switch-off delay ms None 25 Short circuit proof No Yes Pole reversal proof No Yes Switchable capacity MF 0.1 at 100 Q, 24 VDC Switching point accuracy mm ± 0.2 * Hysteresis mm 1.5 for series OSP < 8 *) < 3 *) EMC EN to 60947 Service life >10x108 switching cycles Theoretically unlimited Mechanical Characteristics Housing Macrolon, smoke colour Cable diameter mm2 2 x 0.14 3 x 0.14 Séries ES Magnetic switches are used for electrical sensing of the position of the piston, e.g. at its end positions. They can also be used for sensing of intermediate positions. Sensing is contactless, based on magnets which are built-in as standard. A yellow LED indicates operating status. The magnetic switches are fitted in the dovetail slot in the profiles of AZ-, SZ-, NZ- and NZK-cylinders or with a strap mounting on R-type cylinders. Cable type Cable length Bending radius Weight mm g IP °C G PVC highly flexible/PUR highly flexible 2.5 at 5.0 m, connector on 10 cm cable Fixed > 20, moving > 70 45 (RS-K, cable 2.5m) 80 (RS-K, cable 5.0m) 15 (RS-S) 67 to EN 60529 -25 to +80 < 50 at 50 Hz and 1mm stroke Degree of protection Ambient temperature range **) Shock resistance *) These values depend on the type and diameter of cylinder used - please consult us, **) For the temperature range of the magnetic switches, the surface temperature and own heat generation of the cylinder must be taken into account. 149