Modular Electric Actuators OSP-E - Parker Hannifin GmbH - #18

Text version of the page

ÛSP-E..BHD Belt Actuator with Integrated Bail Bearing Guide - Basic Unit Drive shaft versions with - clamp shaft - plain shaft or - clamp shaft with plain shaft o. (Option) Order stroke* GxH (Sx) LUÏU.' <4m J YxZZ Mounting holes for motor flange or external planetary gearbox » KU x KJ (4x) FB il F i=-q '- 51 o " Note: The mounting holes for the coupling housing / motor flange / gearbox are located on the opposite side to the carrier (motor mounting standard). They also can be located on the same side as the carrier (motor mounting 180° standard). * Note: The mechanical end position must not be used as a mechancial end stop. Allow an additional safety clearance at both ends equivalent to the linear movement of one revolution of the drive shaft, but at least 100 mm. Order stroke = required travel + 2 x safety distance. The use of an Ac motor with frequency converter normally requires a larger safety clearance than that required for servo systems. For further information please contact you local Parker Origa representative. Option - Tandem A Order stroke** A ^ KM (min) ^ Travel • m n { r n ----r T - -1- LU ** Order stroke = required travel + KM min + 2 x safety distance Option - Bi-Parting A ___ Order stroke*** ___ A _ Travel KM (min) Travel r n n n n n n __ m | 1 1 1 1 *** Order stroke = 2 x required travel + KM min + 2 x safety distance Dimension Table [mm] Series A B C E GxH J K M S V x YxZZ CE CF EC EF FB FH KF KM i min KM rec. KN KO KP KR KS KT KUxKJ OSP-E20BHD 185 76.5 73 18 M5x8.5 155 21.1 27.6 67 51 30 M5x8 38 49 60 27 73 36 42.5 180 220 27 18 25 12h7 12h7 65.7 M6x8 OSP-E25BHD 218 88 93 25 M5x10 178 21.5 31 85 64 40 M6x8 42 52.5 79 27 92 39.5 49 210 250 34 21.7 30 16h7 16h7 82 M8x8 OSP-E32BHD 262 112 116 28 M6x12 218 28.5 38 100 64 40 M6x10 56 66.5 100 36 116 51.7 62 250 300 53 30 30 22h7 22h7 106 M10x12 OSP-E50BHD 347 147 175 18 M6x12 288 43 49 124 90 60 M6x10 87 92.5 158 70 164 77 79.5 354 400 75 41 35 32h7 32h7 144 M12x19 (Other dimensions for KS and KB for special drive shafts on request - see order instructions.) 18