Modular Electric Actuators OSP-E - Parker Hannifin GmbH - #15

Text version of the page

Characteristics ÛSP-E..BHD Belt Actuator with integrated Ball Bearing Guide Size 20 to 50 Characteristics Symbol Unit Description General Features Séries OSP-E..BHD Name Belt Actuator with integrated Ball Bearing Guide Mounting See drawings Ambient-Temperature range S i max °c °c -30 +80 Weight (mass) kg See table Installation In any position Slotted profile Extruded anodized aluminium Belt Steel-corded polyurethane Pulley Aluminium Material Guide Ball Bearing Guide Guide rail Hardened steel rail with high precision, accuracy class N Guide carrier Steel carrier with integrated wiper system, grease nipples, preloaded 0.02 x c, accuracy class h Sealing band Hardened, corrosion resistant steel Screws, nuts Zinc plated steel Mountings Zinc plated steel and aluminium Encapsulation class IP 54 ORIGA -SYSTEM - PLUS Standard Versions • Belt Actuator with integrated Ball Bearing Guide • Drive shaft with clamp shaft or plain shaft • choice of motor mounting side • Dovetail profile for mounting of accessories and the actuator itself Weight (mass) and Inertia Series Weight (mass At stroke 0 m [kg] Add per metre stroke Moving mass Inertia [x 10-At stroke 0 m kgm2] Add per metre stroke per kg mass OSP-E20BHD 2.8 4 0.8 280 41 413 OSP-E25BHD 4.3 4.5 1.5 1229 227 821 OSP-E32BHD 8.8 7.8 2.6 3945 496 1459 OSP-E50BHD 26 17 7.8 25678 1738 3103 OSP-E20BHD* 4.3 4 1.5 540 41 413 OSP-E25BHD* 6.7 4.5 2.8 2353 227 821 OSP-E32BHD* 13.5 7.8 5.2 7733 496 1459 OSP-E50BHD* 40 17 15 49180 1738 3103 options • Tandem version for higher moments • Bi-parting version for synchronised movements • Integrated planetary gearbox • Drive shaft with - clamp shaft and plain shaft - hollow shaft with keyway • Special drive shaft versions on request * Version: Tandem and Bi-parting (Option) Installation Instructions Use the threaded holes in the end cap for mounting the actuator. check if profile mountings are needed using the maximum allowable unsup-ported length graph on page 17. At least one end cap must be secured to prevent axial sliding when profile mountings are used. Maintenance Depending on operating conditions, inspection of the actuator is recom-mended after 12 months or 3000 km operation. Please refer to the operating instructions supplied with the actuator. First service start-up The maximum values specified in the technical data sheet for the different products must not be exceeded. Before taking the actuator as a machine into service, the user must ensure the adherence to the Ec Machine Directive 2006/42/EG. 15