Filtration Racor - Parker Hannifin France SAS - #33

Text version of the page

Water Detection Modules Racor Water Detection Kits are available in a wide selection for various installation requirements. Under dash, in-dash and remote mount, these solid-state units may be used with any Racor fuel filter/water separator and water probe. They are manufactured using the highest quality materials and are all 100% electrically tested. An electric detection module analyzes electrical resistance at the water probe and determines if water is present. If so, the detection module operates to indicate water, based on its features listed below. All units reset automatically after water is removed (unless specified). Specifications RK 20726 RK 11-11570 RK 20725 RK 20725-24 Voltage 12 or 24 vdc 12 or 24 vdc 12 vdc 24 vdc Features Light & Buzzer Light & Buzzer Light Only Light Only Description Red DRAIN lamp illuminates continuously and buzzer sounds momentarily when water is detected. Power-up self diagnosis feature and circuit protection included. Includes pre-set vacuum switch (7in.Hg.), connector and outlet adapter fitting. The red DRAIN or CHANGE FILTER lamps illuminate continuously and buzzer sounds momentarily when water is detected. Green ON lamp illuminates with power and red DRAIN lamp illuminates when water is detected. Includes initial power-up self diagnosis feature & circuit protection. Same as RK20725 Dimensions1 2.2” Diameter x 3.2” Depth 2.2” Diameter x 2.0” Depth 1.0 “ H x 1.5”D x 2.0” W 1.0 “ H x 1.5”D x 2.0” W Power Draw: (12 volt) (24 volt) 3 Milliamps 13 Milliamps 3 Milliamps 14 Milliamps 10 Milliamps 10 Milliamps Max. Internal Load 30 Milliamps 30 Milliamps 30 Milliamps 30 Milliamps Weight 0.2 kg 0.4 kg 0.2 kg 0.2 kg RK22628 Bowl Wrench Racor offers a hand wrench to remove all metal and see-through spin-on bowls that feature external ribs. By simply fitting the wrench over the bowl ribs, the bowl can be removed from the replaceable spin-on element,or filter housing with little effort. The wrench is made of a corrosion proof, high-impact, high-strength engineered polymer. One bowl wrench per kit. 33 1Cut 2.0” diameter hole to mount gauges in instrument panel.