Filtration Racor - Parker Hannifin France SAS - #24

Text version of the page

RVFS Element Options The Racor RVFS Series filter vessels offer an unparalleled high efficiency, versatile, economical and low maintenance solution to many fuel delivery and industrial filtration applications. The vessels will accept Micro-filter prefilters, Coalescer/ Water Separator combinations, Monitor/Absorbers and clay treatment bags. Used mainly in the diesel and kerosene re-fuelling industry, these robust vessels can be seen on countless forecourts providing clean dry safe fuel to modern TDI, PD, HDI, CDI and heavy duty vehicles. Equally these vessels can be used for kerosene, aviation fuels, heating oils, gasoline and numerous other industrial fluids and fuels. Features • Carbon steel construction, other materials available • 17 23 ASME code Section VIII construction, stamped and certified. CE certified vessels available. • Zinc plated swing bolt closure. • Buna-N o-ring cover seal • Buna-N o-ring cover seal • Interior epoxy coated MIL C4556E, exterior primer coated (carbon steel versions only) Connections • Inlet and Outlet: 2 inch NPT • Main Drain and Liquid Level Ports: 1/2 inch NPT • Vent and Pressure Relief Connection: 3/4 inch NPT • Differential Pressure Gauge/ Sample Ports: 1/8 inch NPT Optional Accessories • Automatic air eliminator • Pressure relief valve • Differential pressure gauge • Liquid level gauge • Manual water drain valve • Support stand • Wall mount brackets Applications • Jet A, Jet A1 • JP4, JP5, JP8 • Diesel Fuel • Kerosene • Gasoline Coalescer / Separator Coalescer and separator mounted in the RVFS housing. Fluid/fuel is passed from the outside of the coalescer to the inside. The coalescer element provides primary filtration of the fuel as well as coalescing free water from it. The clean fuel passes through the separator barrier and into the outlet of the housing. The coalesced water droplets are repelled by the hydrophobic barrier and are collected in the sump of the housing. The sump should be drained routinely. FP Element Installation Mounting shown – Parker’s cellulose FP microfilter series. These elements offer 95% filtration efficiency of fluids and are available in micron ratings of 1, 2, 5, 10, 25 & 40. When ordering a RVFS for FP installation the kit number 72137 is required. The RVFS-1, 2 & 3 housing series is compatible with all 6-7” OD, 3.5” ID in multiple lengths of 14 inches. FW Element Installation Mounting shown – Parker’s combination water absorbing/ filtration FW filter series.These elements will absorb free water from fuels to less than 15 ppm and offer 95% filtration efficiency and are available in micron ratings of 1, 5, 10 & 25. This product can also be used to absorb free water and filter industrial oils. When ordering a RVFS for FP installation the kit number 72137 is required. The RVFS-1, 2 3 housing series is compatible with all 6- 7”OD, 3.5”ID elements in multiple lengths of 14 inches. RVFS Series 24