Filtration Racor - Parker Hannifin France SAS - #18

Text version of the page

Fuel Filter Primer Pump 18 Applications The Turbine Series Fuel Primer Pump Kit is designed for marine, gen set, and mobile applications. Product The RKP1912 (12 volt) and RKP1924 (24 volt) Fuel Primer Pump Kits can be retrofitted to the Racor 1000 or 900 series fuel filters already in service. The Primer Pump Kit is designed to offer improved ease of maintenance for the user. The Primer Pump Kit is a preassembled system which includes all the components ready for easy installation. It is manufactured with premium materials installed into a die cast and powder coated housing. How it works The Fuel Primer Pump Kit is an innovative and proprietary system consisting of a pre-screen filter, a flow bypass circuit and a roller cell pump powered by a 12VDC brushed motor or a 24VDC brushless motor. When the switch is activated the fuel is drawn into the pre-screen and then pumped through the housing refilling the unit with fuel. When not in use the primer pump system is bypassed and the Racor fuel filter/ water separator functions normally. The Primer Pump Kit works on Racor duplex and triplex systems also. This will allow one Racor primer pump to prime the other filter or filters in a manifold system such as a 751000MAX for example. Benefits • Easy installation. • Pump adds only 3.3” to the over all assembly. • 60 gallons per hour flow rate while in priming mode. • 12 VDC brushed electric motor. • 24 VDC brushless electric motor. • 100 micron pre-screen. • One size fits several models. • Kit includes wiring harness and controller switch. • Allows for electric re-priming of filter and fuel system. • Not for use as continuous duty. A rugged roller-cell pump 100 micron pre-screen Unitized assembly only 3.3” tall 60 gallons per hour flow rate while in priming mode.