| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | Prep-Air II, 05 Economy Series 2 & 3-Unit Modular Combinations | | |
| | | | | |
| | | |
| | | |
| | | Modular Combinations - 05 Economy Series Ordering Information | | |
| | | A | | |
| | | |
| | | |
| | | | | |
| | | 15B | | |
| | | |
| | | |
| | | | | | | | | | Modular Options | | | | Blank | No Port | | | | | Blocks | | | | A | With Mounting | | | | | Bracket & | | | | | Port Block | | | | B | With Mounting | | | | | Bracket, | | | | | Lockout & | | | | | Port Block | | | | C | With Mounting | | | | | Bracket & | | | | | Lockout | | | | G | With Port | | | | | Blocks | | | | J | With Lockout | | | | | (No Port | | | | | Blocks) | | | | K | With Lockout | | | | | and Port | | | | | Blocks | | | | W | With Mounting | | | | | Bracket | | | | | | | | | |
| | | Engineering Level | | |
| | | |
| | | * Will be E ntered at Factory | | |
| | | |
| | | Lubricator Body Options | | |
| | | |
| | | B With Fill Plug F With Body Pressure Fill N No Fill Plug | | |
| | | Filter Bowl Options | | Regulator Pressure | | |
| | | |
| | | Poly Bowl 1 Twist Drain 2 Metal Bowl Guard / Twist D rain N Automatic Pulse Drain P Metal Bowl Guard / Automatic Pulse Drain Metal Bowl 3 Twist Drain 4 Sight Gauge / Twist Drain R Automatic Pulse Drain T Sight Gauge / Automatic Pulse Drain | | |
| | | |
| | | Without Gauge | | |
| | | |
| | | 10 30 PSIG 11 60 PSIG 13 125 PSIG 14 200 PSIG With Gauge * 17 30 PSIG 16 60 PSIG 18 125 PSIG 19 200 PSIG | | |
| | | |
| | | Lubricator Bowl Options | | |
| | | |
| | | Poly Bowl 1 No Drain 2 Metal Bowl Guard / No Drain 5 Pressure Fill 6 Metal Bowl Guard / Pressure Fill Metal Bowl / Sight Gauge 4 Twist Drain 8 Pressure Fill | | |
| | | |
| | | * Includes 1-1/2" Dial Face Gauge Metal Bowls Only | | |
| | | |
| | | |
| | | |
| | | |
| | | BOLD ITEMS ARE MOST POPULAR. | | |
| | | |
| | | CAUTION: REGULATOR PRESSURE ADJUSTMENT - The working range of knob adjustment is designed to permit outlet pressures within their full range. Pressure adjustment beyond this range is also possible because the knob is not a limiting device. This is a common characteristic of most industrial regulators, and limiting devices may be obtained only by special design. For best performance, regulated pressure should always be set by increasing the pressure up to the desired setting. | | |
| | | A WARNING | | |
| | | |
| | | Product rupture can cause serious injury. Do not connect regulator to bottled gas. Do not exceed maximum primary pressure rating. | | |
| | | |
| | | For polycarbonate bowl and sight dome, see Caution on page A2. | | |
| | | |
| | | |
| | | Kits & Accessories (See individual component sections for other kits and accessories.) | | |
| | | |
| | | Body Connector Kit.............................................................PS954P Lockout Valve...................................................................PS95601P Manifold Block..................................................................PS95701P Pressure Switches - DIN Connectors...................................................................P01909 Flying Leads........................................................................P01908 Wall Mounting Kit.................................................................PS955P | | Port Block Kits: NPT................ BSPP............. BSPT............. | | 1/8 1/4 3/8 PS95000P.......PS95001P........PS95002P PS95010P.......PS95011P*.......PS95012P* . PS95020P.......PS95021P........PS95022P | | |
| | | |
| | | * 1/4 & 3/8 inch meet ISO 1179-1 Standard. | | |
| | | |
| | | |
| | | A191 | | Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |