Catalog xxxx/USA

PV SeriesGearhead PV Series, Speci� cations

Parameter Units Ratio PV40 PV60 PV90 PV115 3 12 35 4 5.9 18.9 56 5 6.2 19.6 58 7 5.5 16.7 52 10 3.5 10.6 33 12 18.2 54 15 19.4 58 16 6.5 Nominal Output Torque, Tnom Nm (in-lb) 20 6.5 21.5 67 25 6.7 20.0 63 28 6.5 30 22.5 71 35 6.7 40 6.5 21.5 67 50 6.7 20 63 70 5.5 16.7 52 100 3.5 10.6 33 3 24 70 4,5,12,15 11.8 36.4 108 Max. Acceleration Nm (in-lb) 7,70 11 33.4 104 Output Torque,Tacc
Coming Soon 1 10,100 7 21.2 66 16,20,25,28, 30,35,40,50 13 40 126 3,4,5,12,15,16,Emergency stop Nm (in-lb) 20,25,30,35,40, Output Torque,Tem
2 50 16 55 170 7,70 13.7 44 137 10,100 9.2 39 122 Nominal Input Speed, Nnom RPM 4500 4000 3500 Maximum Input Speed, Nmax RPM 8000 6000 6000 Lifetime h 20,000 1 stage < 15 < 12 < 10 standard Backlash
4 arc-min 2 stage < 18 < 16 < 14 1 stage 96 96 96 Effi ciency at Nominal Torque % 2 stage 94 94 94 Noise level at 3000 RPM
5 dB(A) < 65 < 68 < 70 Maximum Allowable case Temperature Degree C -20 to 100Lubrication Lifetime lubrication Mounting Position Any Direction of Rotation Same pOINT Degree of Protection IP 64

1) tacc+tdec=.2(tacc+tcont+tdec) Tcont=.25Tacc 2) Maximum of 1000 stops. 3) Load aplied to the center of the shaft at 100 rpm. 4) Measured at 2% of rated torque. 5) Measure at 1m.

www.parkermotion.com

Parker Hanni� n CorporationElectromechanical Automation Division