| Cable Management "Plug & Run" Cables "User Friendly" and "robust" were the goals of the cabling design. All cables are 'hi-flex' for durability and are fully shielded. The cables are labeled for quick identification and have suppliers of connectors at critical locations to simplify use. The drive end terminations are ViX series servo drive compatible and have CE compliant connectors including a ferrite bead to improve EMI immunity. Internal Cable Management The LX80's pre-engineered internal cable management offers several benefits. It preserves the LX80's narrow footprint by not requiring additional space for cable management. It allows the table to be mounted in any orientation without a need to re-engineer the cable management. The innovative design is field serviceable and can be maintained without a trip back to the factory. It is designed for and fully tested to last over 20 million cycles. And best of all, it is already done for you! Cable Options From the end of the LX80L, high flex extension cables are included for connection to the servo drive and control. They are offered in 1m and 3m lengths and are connectorized at both ends for easy installation or removal. The servo drive end is connectorized for Parker's ViX series servoamplifiers. The extension cables egress from the table at a right angle to minimize the overall length of the system. In the standard configuration the cable egress to the left, however, the design is flexible and allows them to egress to the right if desired. Multi-Axis Cable Management When building multi-axis systems, flexible rope management for the moving axes should be considered. Parker offers pre-engineered cable management for MX80s and LX80s used as the Y-axis. Contact Parker when putting multi-axis systems together to take advantage of these pre-engineered solutions. |