| | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | Catalog 8092/USA Miniature Stages | | |
| | | |
| | | Features and Options | | |
| | | |
| | | CM04 to CM07 | | |
| | | |
| | | "Plug & Run" Cables | | |
| | | |
| | | "User convenience" is high on the list of cable attributes found in the MX80. The high flex cabling and manufacturer of connectors are reliable, durable and offer easy hook-up for "plug and run" installation. • High flex cables • Plug-in compatibility with ViX drive • CE compliant connectors and shielding • CE compliant ferrite beads • Color coded jackets and labeling | | |
| | | |
| | | E _ Professional encoder Options A non-contact linear optical encoder provides a quadrature output and offers resolution ranging from 10 nanometer to 5 micron . On the MX80L, the encoder is internal to the stage body. There is no increase to the footprint of the unit and no additional external cabling is required. | | |
| | | |
| | | H _ L _ Home and Limit Sensors Reflective optical home and limit sensors are completely housed within the body of the stage. An innovative design adds functionality without sacrificing geometry. Sensor triggers can be easily adjusted over the travel. The output format is an open collector type capable of sinking up to 50ma, and be set as N.O or N.C. | | |
| | | |
| | | Zero Cage Creep Feature | | |
| | | |
| | | High acceleration and smooth translation are both desired attributes in a linear-motor stage. The cross manufacturers of roller bearing system found in the MX80 provides extremely smooth linear translation, and with an anti-cage creep design, operates very well in high acceleration applications. This design employs a box and pinion feature within the supplier of bearing races to eliminate bearing creep. As a result, the MX80 performs well, even | | |
| | | |
| | | Tooling Features | | |
| | | |
| | | Innovative tooling features make mounting and alignment much quicker and easier. • A hardened steel master reference surface is provided along the side of the stage to allow fixturing or other tooling elements to be precisely aligned with the actual travel path. • Two dowel pin holes are provided on the carriage top and base for repeatable mounting of positioner or tooling. | | |
| | | |
| | | ^35 | | |
| | | www.parkermotion.com C11 | | Parker Hannifin Corporation Electromechanical Automation Division Irwin, Pennsylvania | | |
| | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | |