| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | Catalog 8092/USA Square Rail Linear Tables | | |
| | | High Precision | | |
| | | |
| | | |
| | | C3 M4 E1 B1 R1 P1 | | |
| | | |
| | | Pinning Options No multi-axis pinning X axis transfer pinning to Y or Z axis - 30 arc seconds Y axis transfer pinning to X axis - 30 arc seconds Z axis transfer pinning to X axis - 30 arc seconds X axis standard pinning to Y axis - 125 arc seconds Y axis standard pinning to X axis - 125 arc seconds Cleanroom Preparation Class 1000 compatible (standard) R7 Class 1000 with external stainless hardware Class 10 compatible (consult factory for details) R8 Class 10 with external stainless hardware Class 1000 (Std.) with easy lube system R9 | Class 1000 with easy lube system & external Brake Option stainless hardware | | |
| | | P1 P2 P3 P4 P5 P6 | | |
| | | |
| | | R1 R2 R5 | | |
| | | |
| | | |
| | | B1 | | |
| | | No brake Shaft brake** | | "Brake option cannot be used in conjunction with Angular encoder option. Refer to holding torque chart (page B15) to confirm maximum load. | | |
| | | |
| | | B2 | | |
| | | |
| | | |
| | | No encoder Linear encoder (tape scale) 1 micron Linear encoder (tape scale) 0.5 micron Motor Mount*** No motor mount SM 16 - In-line mounting NEMA 23 & SM 23 - In-line mounting NEMA 34 - In-line mounting SM16 - Parallel mounting, "A" location SM16 - Parallel mounting, "B" location SM16 - Parallel mounting, "C" location NEMA 23 - Parallel mounting, "A" location NEMA 23 - Parallel mounting, "B" location NEMA 23 - Parallel mounting, "C" location SM23 - Parallel mounting, "A" location SM23 - Parallel mounting, "B" location SM23 - Parallel mounting, "C" location | | |
| | | |E1 E2 E3_ | | |
| | | E4 Linear encoder (tape scale) 0.1 micron E5 | Rotary shaft encoder** | | |
| | | |
| | | |
| | | * See page B22 for maximum allowable motor shaft diameter. Parallel motor mounts are not available with leadscrew drives. | | |
| | | M1 | | |
| | | M21 Neometric 70 - In-line mounting M37 NEMA 17 - In-line mounting M42 SM232AQ-NPSN Servo motor - In-line mtg. M49 Handcrank / no read out M50| Handcrank w/ read out (0.10 or 1 mm leads only) M61 BE23 - In-line mounting M62 BE23 - Parallel mounting, "A" location M63 BE23 - Parallel mounting, "B" location | | |
| | | |
| | | M2 | | |
| | | |
| | | |
| | | M3 | | |
| | | |
| | | M4 | | |
| | | |
| | | M5 | | |
| | | |
| | | M6 | | |
| | | |
| | | M7 | | |
| | | |
| | | M8 | | |
| | | |
| | | M9 | | |
| | | |
| | | |
| | | M64 BE23 - Parallel mounting, "C" location M71 SGM01 - In-line mounting M75 SGM02 - In-line mounting | | |
| | | M10 | | |
| | | |
| | | M11 | | |
| | | |
| | | M12 | | |
| | | |
| | | |
| | | M13 | | |
| | | |
| | | |
| | | Motor Coupling C1 I No coupling (req. for parallel mounting) C2 0.250" Oldham | | |
| | | C10 14 mm Oldham (M75 motor option)
| | |
| | | C27 C28 C29 C30 | | |
| | | 8 mm Bellows (M71 motor option) 0.188" Oldham (M37 NEMA 17) 0.188" Bellows (M37 NEMA 17) 0.250" Oldhamt 0.250" Bellows"1 0.375" Oldham" 0.375" Bellows"" 9mm Bellows" "Couplings for leadscrew drive | | |
| | | |
| | | C11 | | | |
| | | 14 mm Bellows (M75 motor option)
| |
| | | |
| | | -| C3 | 0.250" Bellows (required for prec.grade) C4 0.375" Oldham C5 | 0.375" Bellows (required for prec.grade) C6 11 mm Oldham C7 | 11 mm Bellows (req. for prec.grade) | | |
| | | C22 | | | |
| | 9 mm Oldham C23 9 mm Bellows | | |
| | | |
| | | |
| | | C24 5 mm Oldham (M37 NEMA 17 w/5mm shaft) C25 5 mm Bellows (M37 NEMA 17 w/5mm shaft) C26 8 mm Oldham (M71 motor option) | | |
| | | C31 | | |
| | | |
| | | C32 | | |
| | | |
| | | C33 C39 | | |
| | | |
| | | |
| | | |
| | | |
| | | Parker Hannifin Corporation Electromechanical Automation Division Irwin, Pennsylvania | | |
| | | www.parkermotion.com | | |
| | | |
| | | B30 | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |