| | | | | | | | | | | | | | | |
| | | |
| | | 192-580011N7 General | | |
| | | |
| | | By using a linear encoder the static position stiffness of the linear actuator increases, as well as its controllability and positioning accuracy. The static position stiffness describes the ability to retain the current position permanently even if an external force (such as a machining force) is applied. Due to the sensor is mounted on the load attachment plate an additional cable carrier is to be fitted -> see page 28. Attention! The sensor cable is not applicable to be mounted into in cable carriers chain. | | |
| | | |
| | | If not otherweise specified, the linear encoder is mounted on the same side as the motor. Otherwise please specify with your order "linear encoder right" or "linear encoder left" (see figure below). | | |
| | | |
| | | Technical data of magnet sensor MSK500 (incremental) (Art.-No.: 035-400014) | | |
| | | |
| | | | | | | | | | | | Feature | Technical data | Feature | Technical data | | | | Supply voltage | 24V DC ± 20% | Output signals | A, /A, B, /B, | | | | Connection / cable length | 2m cable, flying leads | Gap magnetic band / sensor | 0.1 - 2.0mm | | | | Output circuit | LD Line Driver (RS422) | System accuracy | ± (0.025 + 0.01 x L) | | | | | | (Sensor system!) | mm (L in m) | | | | Reference signal | without | Interference protection class | 3, according to IEC 801 | | | | Resolution | 0.01mm | Temperature ranges | -10°Cto + 70°C | | | | Pulse interval | 1us | Protection class | IP67 according to DIN | | | | | | | 40050 (housing) | | | | Maximum travel speed10 | 6.9m/s | Material housing / cable | black plastic/PUR | | | | Power consumption | max. 70mA | | | | | | Technical Data magnetic band MB500 (Art. No.: 035-400015) | | | | Feature | Technical data | Feature | Technical data | | | | Length | Specify desired length | Reference point | without | | | | | (Standard: length = length of HPLA profile) | | | | | | Width | 10mm | Temperature coefficient | (11±1) um/K | | | | Thickness | 1.7mm | Temperature ranges | -10°Cto + 70°C | | | | Accuracy class | 0.1 | Assembly | bond | | | | Cover strip | with cover strip | Compliance | CE | | | | | | | | | | | |
| | | |
| | | 10 The travel speed results from the selected pulse and the corresponding resolution. | | |
| | | |
| | | 34 Parker Hannifin GmbH | | |
| | | |
| | | | | | | | | | | | | | | |