| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | 192-580011N7 Accessories | | |
| | | |
| | | nt 3: HPLA with 2 mechanical limit switches and one proximity switch | | |
| | | |
| | | "Left" safety travel Tripping plate central on carriage "Right" safety travel | | |
| | | |
| | | | | |
| | | |
| | | Attachment variant 4: HPLA with 1 mechanical limit switch and 1 proximity switch, both attached to the moving carriage This is the preferred variant for robot systems if the connections to the switches come via the cable carrier The tripping plates must be assembled in a manner which ensures that the mechanical switch is actuated immediately before the start of the safety travel. "Left" safety travel Limit switch Machine origin Limit switch "Right" safety travel | | |
| | | |
| | | Steel strip cover option Limit switch plate central on carriage | | |
| | | |
| | | This variant is standard. The proximity switch defines the machine origin. The end-limits are realised by software means in the controller COMPAX | | |
| | | |
| | | "Left" safety travel Machine origin "Right" safety travel | | |
| | | |
| | | Steel strip cover option Limit switch plate central on carriage | | |
| | | |
| | | Tripping plate | | |
| | | |
| | | The tripping plate is suitable for all standard load attachment plates. It is mounted at the side of the load attachment plate using cheese-head screws and square nuts. Art. no. Tripping plate: 500-000531 Art. no. Square nuts (2 pcs. required): 135-700001 Art. no. Cheese-head screws M4x6 (2 pcs. required): 130-302294. | | |
| | | in I-: | | |
| | | |
| | | | | |
| | | |
| | | |
| | | Parker Hannifin GmbH Electromechanical Automation | | |
| | | 31 | | |
| | | rker | | |
| | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |