| | | | | | | | | | | |
| | Display | | SpeficSons | |
| | | KT2 | KT4 | KT4H | KT8 | KT9 | KT7 | |
| | Size (W x H x D) | 48 x 24 x 98.5m | n 48 x 48 x 95mrr | 1 48 x 48 x 56mm | 48 x 96 x 98.5m | n 96 x 96x 98.5m | 1-22.5 x 75 x 100mm | |
| | Su|y voltage (muspee fed) | 100 to 240V AC | |
| | 24V AC/D | |
| | Frequency | 50/60Hz | |
| | Power conumpon | Aprox. VA | Aprox. VA | Approx. 8VA | Aprox. VA | Aprox. VA | Approx. 6VA | |
| | Inputey | Input range | |
| | Thermocouel | K | -200 to 1370°C | |
| | -199.9 to 400.0°C | |
| | J | -200 to 1000°C | |
| | R | 0 to 1760°C | |
| | S | 0 to 1760°C | |
| | B | 0 to 1820°C | |
| | E | -200 to 800°C | |
| | T | -199.9 to 400.0°C |-200.0 to 400.0°C |-199.9 to 400.0°C | |
| | N | -200 to 1300°C | |
| | PL-II | 0 to 1390°C | |
| | C (W/Re5-26) | 0 to 2315°C | |
| | RTD | Pt100 | -200 to 850°C | |
| | -199.9 to 850.0°C | -200 to 850.0°C| -199.9 to 850.0°C | |
| | JPt100 3-conductor sstem | -200 to 500°C | |
| | -199.9 to 500.0°C | -200 to 500.0°C | -199.9 to 500.0°C | |
| | DC Current | 4 to 20mA DC 1) | -1999 to 9999, -199.9 to 999.9 -19.99 to 99.99, -1.999 to 9.999 | -2000 to 10000 | -1999 to 9999, -199.9 to 999.9 -19.99 to 99.99, -1.999 to 9.999 | |
| | 0 to 20mA DC 1) | |
| | DCotage | 0 to 1V D 2) | |
| | 0 to 10V DC 3) | |
| | 1 to 5V C 3) | |
| | 0 to 5V C 3) | |
| | | • Scalg and change to the dmal i nt pospose for CD cur rent ad DC vodgenpt. • DC current inpsU pporteth wan exter ttjaounted 50 Q shunt resor (solpa e) | |
| | Control output | Reyaconta | (Must be specified) | 1a | 1a | 1b | 1a1b | 1àb | 1a | |
| | 3A 250V AC (Reteve loa, 1A 250V AC (Inductve oad cos0=0.4),eEt rc life: 100,000 mes | |
| | Non-contact DC voltage | 12 +0 14V DC; maoa current: 40mA (Short-circuit protected) | |
| | DC current | | 4 to 20mAD_oad resance: xM50 Q | |
| | Alarm outputl | Reay coittàa3A 250V AC (Rete/e oad) Open doctor, Conr ol Electric life: 100,000rtes capacily 24V DC 0.1A(Max) | |
| | Control mode | Actions mentioned below can beteted by key operation. [Defaut PID] PI D (with auto-tuning function), PI, PD (with manual reet function), P (with manual reet function), ON/OFF action | |
| | Accuracy | Thermocouple: Within ±0.2% of each input pan ±1 digit or within ±2°C whichever isgreater However, R and S input; within ±6°C in the range of 0 to 200°C B input 0 to 300°C: Accuracy isnot guaranteed. K, J, E and N input ess than 0 °C: Within ±0.4% of input pan ±1 digit RTD: Within ±0.1% of each input pan ±1 digit or ±1 °C whichever is greater DC current and DC voltage: Within ±0.2% of each input span ±1 digit | |
| | Sampling period | 250ms | |
| | Hystereiss | Thermocouple & RTD: 0.1 to 100.0 °C DC current and DC votage: 1 to 1000 (The decimal point pace folowtìie section) | |
| | Proportional band | Thermocouple: 0 to 1000°C RTD: 0.0 to 999.9°C DC current and DC votage: 0.0 to 100.0% | 0.0 to 110.0% | |
| | Integral time | 0 to 1000 econds | |
| | Derivative time | 0 to 300 econds | |
| | Proportional cycel | 1 to 120 seconds | |
| | Alowable voltage fluctuation | When 100 to 240V AC; 85 to 264V AC When 24V AC/DC; 20 to 28V AC/DC | |
| | Insulated resistance | 500V DC 10MQ or greater | |
| | Breakdown voltage | 1.5KV AC for 1 min between input terminal and power terminal & between output terminal and power terminal | See KT8/KT9 | 1.5KV AC for 1 min between input terminal and power terminal & between output terminal and power terminal | 1.5kV AC for 1min between input terminal and ground terminal between input terminal and power terminal between power terminaand ground terminal between output terminal and ground terminal, & between output term inal and power terminal | 1.5KV AC for 1 min between input terminal and power terminal & between output terminal and power terminal | |
| | | | | | | | | | | |