| Fast The combination of carefully selected, fast hardware components and a specially developed driver software gives P400 real high-speed inspection capabilities. For example, extracting more than 1,000 object features takes less than 50ms. Even if inspecting with several industrial cameras, P400 won't slow down your production line. Made for the factory floor During the development of the PC-Imagechecker P400, we attached great importance to designing a durable system, suitable for industrial use. P400 has been thoroughly tested with regards to vibration and shock. Furthermore, each single P400 component has to pass an extended quality test before being used for the production of a system. Each single P400 system has to withstand a 48-hour test run. Due to its backplane architecture, servicing a P400 system is easy. Expandability The system can be upgraded with up to two additional camera boards, which allows inspections to be carried out with up to 6 cameras parallel or 12 cameras serial. P400 comes equipped with standard interfaces such as RS232, USB, Ethernet and even a parallel interface card with 32 digital I/Os . Furthermore, thanks to its open design, several unoccupied PCI slots allow additional plug-in cards to be used, e.g. a Profibus interface. Designed with the customer in mind The PC-Imagechecker P400 is based on a powerful IBM-compatible industrial computer and offers several important and convenient features: ■ Rugged 19" metal housing ■ Lockable front door ■ Changeable hard-disk drive for easy ■ CD-RW drive ■ 3-point fixing for all slot-cards ■ Keyboard, mouse and USB connectors on the front |