Catalogue A-Series
www.mew-europe.com
print switch display
Page / 6
Panasonic - Matsushita Electric Works - 80703
/ 6
See other catalogues for Panasonic - Matsushita Electric Works
Text version of the page
MICRO-IMAGECHECKER A210A110 MultiChecker V2 Series
Panasonic
ideas for life
■ System configuration diagram
■ Vision Backup-Tool Ver.2
The product data created with the MICRO-IMAGECHECKER A series and the image data stored in the controller can be stored on a PC using Windows.
Stored data can be restored to the A series controller.
* However, it is not possible to directly restore type data backed up using Vision Backup-Tool with the previous product (Ver. 1) to V2 (Ver. 2). In this case, use the dedicated data conversion software (freeware) to convert the Ver. 1 type data for V2 use, then transfer it to V2 and perform a backup again. If you require the data conversion software, contact your Matsushita Automation Controls Co. Ltd. representative.
Image Processing Device
MICRO-IMAGECHECKER®
A210A110
MultiChecker Ver.2 Series
High-speed High-speed random cable random trigger camera Lens
B-au
Camera extension cable
Middle ring CS mount camera
*1 The A100 series connects to one camera. *2 Use where necessary. *3 When using 2 industrial cameras with the A200 series, connect the same type of camera.
DHH1ÍU
*3
■ Table of Product Numbers
• MICRO-IMAGECHECKER A-Series Controller
• Lens / middle ring
Item
Specifications
Part No.
MICRO-IMAGECHECKER A200 Series
A210
Multi-Checker V2 : CE
NPN Output
ANMA212V2
PhotoMos Output
ANMA218V2
A210
Multi-Checker : CE
NPN Output
ANMA212
MICRO-IMAGECHECKER
A100 Series
A110
Multi-Checker V2 : CE
NPN Output
ANMA112V2
PhotoMos Output
ANMA118V2
A110
Multi-Checker : CE
NPN Output
ANMA112
Item
Specifications
Part No.
CS mount lens
f2.8 CS mount compact lens
ANM8828
f2.8 CS mount compact lens with lock
ANM88281
f4 CS mount compact lens
ANM8804
f4 CS mount compact lens with lock
ANM88041
f8 CS mount compact lens
ANM8808
f8 CS mount compact lens with lock
ANM88081
C mount lens
f6.5 C mount lens
ANB842
f8.5 C mount lens
ANB843
f8.5 C mount lens with lock
ANB843L
f16 C mount compact lens
ANB845N
f16 C mount compact lens with lock
ANB845NL
f25 C mount compact lens
ANB846N
f25 C mount compact lens with lock
ANB846NL
f50 C mount lens
ANB847
f50 C mount lens with lock
ANB847L
f50 C mount compact lens
ANM8850
f50 C mount compact lens with lock
ANM88501
Middle ring
5 mm middle ring
ANB84805
(0.5/1/5/10/20/40 mm) middle ring
ANB848
• Data backup software
Item
Specifications
Part No.
Vision Backup-Tool Ver.2
English version
ANM70131V2
Microsoft windows NT4.0/95/98/Me/2000 compatible. An operating system is not included with this software.
• Accessories
Item
Specifications
Part No.
I/O terminal block
For input: 1 piece, for output, 1 piece
ANMA8001
BNC connector
Monitor BNC jack to PIN jack adapter
ANM8606
• Camera / Keypad / Monitor
Item
Specifications
Part No.
C mount camera
Progressive Double-speed Random: CE
ANM831
CS mount camera
support electric-shutter with 3 m cable
ANM832
support electric-shutter with 3 m cable: CE
ANM832CE
Keypad
with 2 m cable
ANM85202
with 3 m cable
ANM85203
with 2 m cable: CE
ANM85202CE
with 3 m cable: CE
ANM85203CE
Monitor
Panasonic GPBM910 (100 V AC/12 V DC)
AUGPBM910
• Camera cable
Item
Specifications
Part No.
Double-speed random camera cable
3 m
ANM84303
3 m: CE
ANM84303CE
Camera extension cable
2 m extension: total 5 m
ANM84002
7 m extension : total 10 m
ANM84007
12 m extension: total 15 m
ANM84012
17 m extension: total 20 m
ANM84017
2 m extension : total 5 m: CE
ANM84002CE
7 m extension: total 10 m: CE
ANM84007CE
12 m extension: total 15 m: CE
ANM84012CE
17 m extension: total 20 m: CE
ANM84017CE
It won't stop advancing. The monstrously small A Series!
Unless otherwise specified, estimate and delivery prices do not include technician dispatching and other related services. Therefore, for the situations given below, additional charges may be added.
• Installation and trial operation guidance • Inspections, adjustments, and repairs
• Technical support and instruction
• Serial Cable
Item
Specifications
Part No.
COM port connecting cable
COM port and PC (D-SUB : 9 pin) connection, 3 m
ANM81103
COM port and PLC (discrete-wire cable) connection, 3 m
ANM81303
TOOL port connecting cable
COM port and PC (D-SUB : 9 pin) connection, 10 cm
ANM812001
To USA Customer
• Products sold by seller are covered by the warranty and patent indemnification provisions in its Terms and Conditions of Sale only.
PRINTED WITH
SOY INK
These These
materials are printed on ECF pulp.
materials are printed with earth-friendly vegetable-based (soybean oil) ink.
Matsushita Electric Works, Ltd. Automation Controls
■ Head Office: 1048, Kadoma, Kadoma-shi, Osaka 571-8686, Japan
ARCT1B178E 200111-2YT
Company
COPYRIGHT © 2001 All Rights Reserved Specifications are subject to change without notice.
11/2004
11/2004
DirectIndustry's Virtual Technical Library: PDF Catalogue | Technical Documentation | Brochure | Manual | Industrial directory | Specifications | Characteristics
Search Go
page 1 p.1
page 2 p.2
page 3 p.3
page 4 p.4
page 5 p.5
page 6 p.6
pdf-page pdf di En 2008-12-49-02