Catalogue 2002 Lithium Batteries - Technical Handbook
www.panasonic-industrial.com/batteries
print switch display
Page / 34
Contact the
Manufacturer
Where to buy
this product ?
Request
a Quote
Panasonic Industrial Batteries -
/ 34
See other catalogues for Panasonic Industrial Batteries
Text version of the page

Charging

Charging circuits

Charging/discharging cycle Approx. 1,000 times at 10% discharge depth to nominal capacity Charging system* Constant-voltage charging.(Please strictly adhere to the specifi ed charge voltage) Operating temperature -20 C ~ + 60 C * Consult with Panasonic concerning constant-current charging systems. The charging circuit is crucial in terms of ensuring that full justice will be done to the battery characteristics. Consider it carefully as the wrong charging circuit can cause trouble.

Precautions regarding the charge voltage setting

Under no circumstances should trickle charging, which is used for nickel-cadmium batteries, be used. Ignoring this precaution will cause the battery voltage to rise to about 5V, resulting in a deterioration of performance. If a fi xed-charging method is applied, please adhere to the specifi ed charging voltage.Guaranteed voltage is 2.8V ~ 3.2V at the temperature of -20C~60C. * If the charging voltage exceeds the specifi cations, the internal resistance of the battery will rise and may cause battery deterioration. Also, with a charge voltage around 4V, corrosion of the (+)terminal (case) may occur, causing leakage. ("Infl uence of the charge voltage on ML batteries" on the back.) * It is not possible for the battery capacity to recover completely when the charging voltage is below the specifi cation.
Chapter 3 ML0V5V ML0V 3.1V3.3V wrong right

Charge voltage range

Manganese Lithium Coin Type Batteries (ML series) Basic conditions Fixed-voltage chargeCharge voltage: 2.8~3.2V (Standard voltage: 3.1V) Charge current: For a battery voltage of 2.5V ML612S,ML614S,ML616S Approx. 0.3 mA or below ML621S Approx. 0.6 mA or below ML920S Approx. 1.2 mA or below ML1220 Approx. 1.2 mA or below ML2020 Approx. 3.0 mA or below

Recommended charging circuits Mixed usage of batteries

Do not use these batteries and lithium primary batteries or other rechargeable batteries together, and do not use new batteries and old batteries together even if they are of the same type.

Chapter 3- 65

DirectIndustry's Virtual Technical Library: PDF Catalogue | Technical Documentation | Brochure | Manual | Industrial directory | Specifications | Characteristics
Search Go
Contents table
page 1 p.1
page 2 p.2
page 3 p.3
page 4 p.4
page 5 p.5
page 6 p.6
page 7 p.7
page 8 p.8
page 9 p.9
page 10 p.10
page 11 p.11
page 12 p.12
page 13 p.13
page 14 p.14
page 15 p.15
page 16 p.16
page 17 p.17
page 18 p.18
page 19 p.19
page 20 p.20
page 21 p.21
page 22 p.22
page 23 p.23
page 24 p.24
page 25 p.25
page 26 p.26
page 27 p.27
page 28 p.28
page 29 p.29
page 30 p.30
page 31 p.31
page 32 p.32
page 33 p.33
page 34 p.34
pdf-page pdf di En 2008-12-49-02