AccuSep® Inorganic Membranes - PALL - #1

Text version of the page

AccuSep™ Inorganic Membranes Selection Guide E78a Description Pall AccuSep filter elements, which are available in a seamless, tubular format, are high performance, low cost inorganic microfiltration products. These sintered metal filter elements are produced by a proprietary process which creates a high void volume, strong and very uniform medium. This medium is relatively thin, resulting in a structure that is up to 3 times more permeable than that found in conventional pressed sintered metal tubes. Available Sizes Standard Nominal Outer Diameters: 12 inch/12.7 mm and 34 inch/19.05 mm Standard Lengths: Up to 8 ft/2.43 m long Medium Wall Thickness: Configurations Examples of standard configurations are: Pall will provide custom configurations to meet your requirements. Available Metallurgy 316L Stainless Steel - standard 304L Stainless Steel 310SC Stainless Steel Hastelloy X Inconel 600 The filter element hardware is dictated by the operating conditions of the application. AccuSep™ Filter Element Tube Outer Filter Area Filter Area Nominal Wall Diameter (Sq Ft) (Sq M) Thickness inches/mm per linear per linear inches/mm foot meter 0.47/11.8 0.12 0.037 0.018/0.46 0.72/18.2 0.19 0.057 0.025/0.63 Configuration Typical Use Single tube, double open Cross flow element ended OEM product Substrate for additional functional coatings Single tube, single open Backwashable filter ended, tube flare connection element on the end Single or multi-tube assembly, Blowback filter element single open ended, connected to blowback venturi on the Retrofits existing porous open end metal or polymeric bag house filters Multi-tube or larger assembly, Filter element double open ended, gasket seals Multi-tube or larger assembly, Filter element single open ended, threaded open end