Woven Aluminium Mesh - 2 Pages

  1. P. 1

  2. P. 2

Catalogue excerpts

Aluweave is a versatile, highly conductive gasket medium produced by filling a woven aluminium mesh with silicone, fluorosilicone or neoprene rubber. It is particularly useful where thicker gaskets are unsuitable but, because it is woven, it is not viable for 'landwidths'of less than 3mm for die-cut gaskets. Surface irregularities should not exceed 0.05mm. This material is generally supplied as pre-cut gaskets constructed to the customer's specific requirements but can also be supplied in sheets. Connector gaskets in the DC Series include Aluweave materials. Aluweave is used for connector gaskets and other'thin'gasket applications. If aluminium is unsuitable because of galvanic compatibil- ity or shielding effectiveness, the expanded Monel based GX Shielding Aluweave gaskets provide good 'point contact'where each crossover occurs, while the rubber filler ensures excellent environmental sealing. Aluweave, like nearly all other conductive gasket materials, should not be fixed with a conductive or pressure sensitive adhesive and should be fixed as a friction fit utilising the fixing screws to position the gasket before tightening. Aluminium Mesh Silicone Rubber Temperature range: SERIES FILLER CODE GA=Aluweave SX=Silicone Specify: Series - Filler Code - Thickness - Size or drawing number . GA-SX-0005-Drawing No, specifies a cut gasket fabricated from 0.5 mm thick Silicone Aluweave Springwood Industrial Estate

 Open the catalogue to page 1

Monex is an expanded Monel foil filled with silicone rubber. The exposed foil surface provides excellent conductivity combined with good corrosion resistance. Monex is also a'thin'gasket medium, similar to Aluweave, and is particularly suitable for connector or waveguide gaskets where a pressure seal and EMI shield is required. The material cannot be effectively joined so gaskets should be cut in one piece wherever possible. Thicknesses of 0.5mm and 0.75mm are available and it can be supplied in sheet To retain the strength of the foil, we recommend that a minimum land-width of 3mm should remain...

 Open the catalogue to page 2

All P&P Technology catalogues and technical brochures

  1. Metweave

    4 Pages

    En
  2. Knitted Wire Mesh

    10 Pages

    En
  3. Shielded Windows

    3 Pages

    En
  4. Thin EMC Gaskets

    2 Pages

    En