Silfill Conductive Adhesive - 1 Pages

  1. P. 1

Catalogue excerpts

Our AS Shielding one-part conductive particle filled silicone rubber adhesives are available using standard silicone and fluorosilicone base compounds combined with a selection of particle fillers to produce a readily extrudable paste which self-cures when exposed to atmospheric moisture. Once the thixotropic paste is fully cured it provides excellent adhesion and low volume resistivity. SILFILL CONDUCTIVE ADHESIVE AS filled silicone adhesives are generally employed as caulking materials to fill voids, surface imperfections on mating surfaces or to retain a conductive gasket in position during assembly. Most conduc- tive gaskets depend on flat, accurate and clean mating surfaces to provide a positive, low impedance bond and the additional use of conductive adhesives should be avoided wherever possible. Shelf life is up to sixteen weeks (30ml, 55ml) or six months (71 ml, 170ml, 310ml) if kept in the original packaging and stored in a dry AS adhesives should be injected under pressure if possible, and, where used as or with a gasket, should be retained under pressure whilst curing. This enhances the conductivity of the compound. Care should be taken when handling the compound as contact can irritate the skin Standard base rubber is silicone. Specify: Series - Filler code - Tube size AS-N-030 is a 30ml cartridge of nickel-graphite filled silicone adhesive Some filler types may be subject to minimum order quantities. AS=Silfill conductive adhesive Springwood Industrial Estate FILLER CODE N=Nickel Graphite J=Silver Aluminium H=Silver Copper TUBE SIZE

 Open the catalogue to page 1

All P&P Technology catalogues and technical brochures

  1. Metweave

    4 Pages

    En
  2. Knitted Wire Mesh

    10 Pages

    En
  3. Shielded Windows

    3 Pages

    En
  4. Thin EMC Gaskets

    2 Pages

    En